Home
  •  

UPS Alert trap Rule - The dip switch settings on the UPS have been changed

SCUtils.APC.UPS.TrapRule.upsDipSwitchChanged (Rule)

Knowledge Base article:

Summary

SNMP Trap from APC UPS

Causes

The dip switch settings on the UPS have been changed, possibly altering UPS performance.

Resolutions

Please use the APC web interface for more detailed information.

Element properties:

TargetSCUtils.APC.UPS.Device
CategoryAlert
EnabledTrue
Alert GenerateTrue
Alert SeverityWarning
Alert PriorityNormal
RemotableTrue
Alert Message
UPS Alert trap Rule - The dip switch settings on the UPS have been changed

The dip switch settings on the UPS have been changed, possibly altering UPS performance

Source {0}
Location is {1}
IP {2}
Primary owner is {3}

Member Modules:

ID Module Type TypeId RunAs 
DS DataSource System.NetworkManagement.SnmpTrapEventProvider Default
Alert WriteAction System.Health.GenerateAlert Default

Source Code:

<Rule ID="SCUtils.APC.UPS.TrapRule.upsDipSwitchChanged" Enabled="true" Target="SCUtils.APC.UPS.Device" ConfirmDelivery="false" Remotable="true" Priority="Normal" DiscardLevel="100">

  <Category>Alert</Category>

  <DataSources>

    <DataSource ID="DS" TypeID="NetworkLibrary!System.NetworkManagement.SnmpTrapEventProvider">

      <IP>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/SNMPAddress$</IP>

      <OIDProps>

        <OIDProp>.1.3.6.1.4.1.318.0.16</OIDProp>

      </OIDProps>

      <EventOriginId>$Target/Id$</EventOriginId>

      <PublisherId>$Target/Id$</PublisherId>

      <PublisherName>Snmp Event</PublisherName>

      <Channel>SnmpEvent</Channel>

      <LoggingComputer/>

      <EventNumber>1501</EventNumber>

      <EventCategory>5</EventCategory>

      <EventLevel>10</EventLevel>

      <UserName/>

      <Params/>

    </DataSource>

  </DataSources>

  <WriteActions>

    <WriteAction ID="Alert" TypeID="Health!System.Health.GenerateAlert">

      <Priority>1</Priority>

      <Severity>1</Severity>

      <AlertOwner/>

      <AlertMessageId>$MPElement[Name="SCUtils.APC.UPS.TrapRule.upsDipSwitchChanged.AlertMessage"]$</AlertMessageId>

      <AlertParameters>

        <AlertParameter1>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/sysName$</AlertParameter1>

        <AlertParameter2>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/Location$</AlertParameter2>

        <AlertParameter3>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/SNMPAddress$</AlertParameter3>

        <AlertParameter4>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/PrimaryOwnerContact$</AlertParameter4>

      </AlertParameters>

      <Suppression>

        <SuppressionValue/>

      </Suppression>

      <Custom1/>

      <Custom2/>

      <Custom3/>

      <Custom4/>

      <Custom5/>

      <Custom6/>

      <Custom7/>

      <Custom8/>

      <Custom9/>

      <Custom10/>

    </WriteAction>

  </WriteActions>

</Rule>