监视网络设备上的缓冲区分配失败的级别
此监视器指示此设备上的内存缓冲区分配失败次数。 此监视器有两种可能的状态:
正常: 分配错误数低于阈值。
错误: 分配错误数超过阈值。
可以为此监视器配置以下选项:
选项 | 定义 | 默认 |
间隔 | 检查设备状态时间间隔(以秒为单位) | 240 秒 |
重试次数 | 在丢弃时间间隔样本之前,每个监视时间间隔中的尝试次数 | 3 |
样本数 | 监视器更改状态之前的连续样本数 | 3 |
超时 | 样本超时并重新尝试对值进行取样之前等待设备响应的时间量(以毫秒为单位) | 3,500 毫秒 |
阈值 | 缓冲区分配失败次数 | 0 |
此监视器在内存缓冲区分配失败次数超过配置的阈值时进入错误状态。 默认值为 0。
使用运行状况资源管理器,在监视器的“状态更改事件”选项卡上检查状态更改的详细信息。 此数据显示计算所得的性能计数器值,该值导致运行状况状态发生更改。 有关问题和故障排除过程的详细信息,请查阅设备制造商的文档。
Target | System.NetworkManagement.Cosine_Performance_Memory | ||
Parent Monitor | System.NetworkManagement.Memory.MemoryException | ||
Category | AvailabilityHealth | ||
Enabled | True | ||
Alert Generate | True | ||
Alert Severity | MatchMonitorHealth | ||
Alert Priority | Normal | ||
Alert Auto Resolve | True | ||
Monitor Type | System.NetworkManagement.ComputedThresholdMonitorType | ||
Remotable | True | ||
Accessibility | Public | ||
Alert Message |
| ||
RunAs | Default |
<UnitMonitor ID="System.NetworkManagement.Cosine.Memory.BufferAllocationFailures" Accessibility="Public" Enabled="true" Target="NetworkLibrary!System.NetworkManagement.Cosine_Performance_Memory" ParentMonitorID="System.NetworkManagement.Memory.MemoryException" Remotable="true" Priority="Normal" TypeID="System.NetworkManagement.ComputedThresholdMonitorType" ConfirmDelivery="false">
<Category>AvailabilityHealth</Category>
<AlertSettings AlertMessage="System.NetworkManagement.Generic.Memory.BufferAllocationFailures.AlertMessage">
<AlertOnState>Error</AlertOnState>
<AutoResolve>true</AutoResolve>
<AlertPriority>Normal</AlertPriority>
<AlertSeverity>MatchMonitorHealth</AlertSeverity>
<AlertParameters>
<AlertParameter1>$Target/Host/Property[Type="System!System.Entity"]/DisplayName$</AlertParameter1>
<AlertParameter2>$Data/Context/Value$</AlertParameter2>
</AlertParameters>
</AlertSettings>
<OperationalStates>
<OperationalState ID="OverThreshold" MonitorTypeStateID="MTSThresholdError" HealthState="Error"/>
<OperationalState ID="UnderThreshold" MonitorTypeStateID="MTSThresholdSuccess" HealthState="Success"/>
</OperationalStates>
<Configuration>
<Interval>300</Interval>
<NoOfRetries>3</NoOfRetries>
<NumberOfSamples>3</NumberOfSamples>
<Timeout>3500</Timeout>
<SnmpVarBinds>
<SnmpVarBind>
<OID>.1.3.6.1.4.1.3085.3.1.5.2.1.29.$Target/Property[Type="NetworkLibrary!System.NetworkManagement.LogicalDevice"]/Index$</OID>
<Syntax>0</Syntax>
<Value VariantType="3"/>
</SnmpVarBind>
</SnmpVarBinds>
<ComputedPerformanceValue>
<Delta>
<NumericValue>
<XPathQuery Type="Double">SnmpVarBinds/SnmpVarBind[OID=".1.3.6.1.4.1.3085.3.1.5.2.1.29.$Target/Property[Type="NetworkLibrary!System.NetworkManagement.LogicalDevice"]/Index$"]/Value</XPathQuery>
</NumericValue>
</Delta>
</ComputedPerformanceValue>
<Threshold>0</Threshold>
<ObjectName>Memory</ObjectName>
<CounterName>Change in Buffer Allocation Failures</CounterName>
</Configuration>
</UnitMonitor>