Solid State Disk Wear Status Change.
This could be caused by the following:
Solid State Disk Wear Status Change. This trap signifies that the agent has detected a change in the SSD wear status of a drive array physical drive. The variable cpqDaPhyDrvSSDWearStatus indicates the current SSD wear status.
Solid State Disk Wear Status Change. This trap signifies that the agent has detected a change in the SSD wear status of a SAS or SATA physical drive. The variable cpqSasPhyDrvSSDWearStatus indicates the current SSD wear status.
Solid State Disk Wear Status Change. This trap signifies that the agent has detected a change in the SSD wear status of a SATA physical drive. The variable cpqIdeAtaDiskSSDWearStatus indicates the current SSD wear status.
If the SSD wear status is ssdWearOut(6), replace the drive.
For additional troubleshooting, the following tasks are available:
HPE OneView Web Console
HPE Integrated Lights-Out
The following are monitored NT Event Log entries by this rule:
Event ID | Log File | Publisher | Log Message |
---|---|---|---|
3049 | HP OneView Management | HP OneView Event Manager-Server | Solid State Disk Wear Status Change (3049) Solid State Disk Wear Status Change. This trap signifies that the agent has detected a change in the SSD wear status of a drive array physical drive. The variable cpqDaPhyDrvSSDWearStatus indicates the current SSD wear status. User Action: If cpqDaPhyDrvSSDWearStatus is 'ssdWearOut(6)', replace the drive. Source IP Address: '%1';Source System GUID: '%2'; Server Hostname: '%3';Location: '%5'; Controller Index: '%6'; Index: '%7'; Location String: '%8'; Type:'%9'; Model:'%10'; Firmware:'%11'; Serial Number: '%12' Status: '%14';(1=other, 2=ok, 3=fiftySixDayThreshold, 4=fivePercentThreshold, 5=twoPercentThreshold, 6=ssdWearOut) [SNMP TRAP: 3049 in CPQIDA.MIB] |
5026 | HP OneView Management | HP OneView Event Manager-Server | Solid State Disk Wear Status Change (5026) Solid State Disk Wear Status Change.This trap signifies that the agent has detected a change in the SSD wear status of a SAS or SATA physical drive. The variable cpqSasPhyDrvSSDWearStatus indicates the current SSD wear status. User Action: If cpqSasPhyDrvSSDWearStatus is 'ssdWearOut(6)', replace the drive. Source IP Address: '%1';Source System GUID: '%2'; Server Hostname: '%3';Location: '%5';Location String: '%6'; Hba Index: '%7'; Index: '%8';Type: '%9';(1=other, 2=sas, 3=sata) Model: '%10'; Firmware: '%11'; Serial Number: '%12'; SAS Address: '%13'; Status: '%14';(1=other, 2=ok, 3=fiftySixDayThreshold, 4=fivePercentThreshold, 5=twoPercentThreshold, 6=ssdWearOut) [SNMP TRAP: 5026 in CPQSCSI.MIB] |
14006 | HP OneView Management | HP OneView Event Manager-Server | Solid State Disk Wear Status Change (14006) Solid State Disk Wear Status Change. This trap signifies that the agent has detected a change in the SSD wear status of a SATA physical drive. The variable cpqIdeAtaDiskSSDWearStatus indicates the current SSD wear status. User Action: If cpqIdeAtaDiskSSDWearStatus is 'ssdWearOut(6)', replace the drive. Source IP Address: '%1';Source System GUID: '%2'; Server Hostname: '%3';ATA Disk Controller Index: '%5'; ATA Disk Index: '%6'; ATA Disk Model: '%7'; ATA Disk Firmware Revision: '%8'; ATA Disk Serial Number: '%9'; ATA Disk Status: '%10'; (1=other, 2=ok, 3=fiftySixDayThreshold, 4=fivePercentThreshold, 5=twoPercentThreshold, 6=ssdWearOut) ATA Disk Channel: '%11'; (1=other, 2=channel0, 3=channel1, 4=serial) ATA Disk Number: '%12'; (1=other, 2=device0, 3=device1, 4=sataDevice0, 5=sataDevice1, 6=sataDevice2, 7=sataDevice3, 8=sataDevice4, 9=sataDevice5, 10=sataDevice6, 11=sataDevice7, 21=bay1, 22=bay2, 23=bay3, 24=bay4, 25=bay5, 26=bay6, 27=bay7, 28=bay8) [SNMP TRAP: 14006 in CPQIDE.MIB] |
See the latest information about Hewlett Packard Enterprise OneView Server Management Pack:
HPE Microsoft Management Integration Solution
Hewlett Packard Enterprise OneView Server Management Pack
Target | HewlettPackard.Oneview.Server.HPProliantServer |
Category | Alert |
Enabled | True |
Alert Generate | True |
Alert Severity | Error |
Alert Priority | High |
Remotable | True |
Event Log | HP OneView Management |
ID | Module Type | TypeId | RunAs |
---|---|---|---|
DS | DataSource | Microsoft.Windows.EventProvider | Default |
GenerateAlert | WriteAction | System.Health.GenerateAlert | Default |
<Rule ID="HewlettPackard.Oneview.Server.HPProliantServer.Solid_State_Disk_Status_Change.Rule" Target="HewlettPackard.Oneview.Server.HPProliantServer" Enabled="true" ConfirmDelivery="false" Remotable="true" Priority="Normal" DiscardLevel="100">
<Category>Alert</Category>
<DataSources>
<DataSource ID="DS" TypeID="Windows!Microsoft.Windows.EventProvider">
<LogName>HP OneView Management</LogName>
<Expression>
<And>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">PublisherName</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">HP OneView Event Manager-Server</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<RegExExpression>
<ValueExpression>
<XPathQuery>EventDisplayNumber</XPathQuery>
</ValueExpression>
<Operator>MatchesMOM2005BooleanRegularExpression</Operator>
<Pattern>^(3049|5026|14006)$</Pattern>
</RegExExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Params/Param[2]</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">$Target/Property[Type="HewlettPackard.Oneview.Server.HPProliantServer"]/ObjectID$</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
</And>
</Expression>
</DataSource>
</DataSources>
<WriteActions>
<WriteAction ID="GenerateAlert" TypeID="Health!System.Health.GenerateAlert">
<Priority>2</Priority>
<Severity>2</Severity>
<AlertName>Solid State Disk degraded.</AlertName>
<AlertDescription>$Data/EventDescription$</AlertDescription>
<AlertOwner/>
<Suppression>
<SuppressionValue>$Data/Params/Param[2]$</SuppressionValue>
</Suppression>
</WriteAction>
</WriteActions>
</Rule>