Home
  •  

Temperature failed and system shutdown.

HewlettPackard.Oneview.Server.HPProliantServer.Temperature_failed_and_system_shutdown.Rule (Rule)

Knowledge Base article:

Summary

A temperature has failed and the system will shut down.

Causes

This could be caused by the following:

Resolutions

None

For additional troubleshooting, the following tasks are available:

Related Events

The following are monitored NT Event Log entries by this rule:

Event ID

Log File

Publisher

Log Message

6017

HP OneView Management

HP OneView Event Manager-Server

Thermal Failure (6017) The temperature status has been set to failed. The system will be shut down due to this thermal condition. Source IP Address: '%1'; Source System GUID: '%2'; Server Hostname: '%3'; [SNMP TRAP: 6017 in CPQHLTH.MIB]

6040

HP OneView Management

HP OneView Event Manager-Server

Thermal Failure (6040) The temperature status has been set to failed in the specified chassis and location. The system will be shut down due to this condition. Source IP Address: '%1'; Source System GUID: '%2'; Server Hostname: '%3'; Chassis: '%5'; Location: '%6'; (1=other, 2=unknown, 3=system, 4=systemBoard, 5=ioBoard, 6=cpu, 7=memory, 8=storage, 9=removableMedia, 10=powerSupply, 11=ambient, 12=chassis, 13=bridgeCard) [SNMP TRAP: 6040 in CPQHLTH.MIB]

Related Links

See the latest information about Hewlett Packard Enterprise OneView Server Management Pack:

HPE Microsoft Management Integration Solution

Management Pack Information

Hewlett Packard Enterprise OneView Server Management Pack

Element properties:

TargetHewlettPackard.Oneview.Server.HPProliantServer
CategoryAlert
EnabledTrue
Alert GenerateTrue
Alert SeverityError
Alert PriorityHigh
RemotableTrue
Event LogHP OneView Management

Member Modules:

ID Module Type TypeId RunAs 
DS DataSource Microsoft.Windows.EventProvider Default
GenerateAlert WriteAction System.Health.GenerateAlert Default

Source Code:

<Rule ID="HewlettPackard.Oneview.Server.HPProliantServer.Temperature_failed_and_system_shutdown.Rule" Target="HewlettPackard.Oneview.Server.HPProliantServer" Enabled="true" ConfirmDelivery="false" Remotable="true" Priority="Normal" DiscardLevel="100">

  <Category>Alert</Category>

  <DataSources>

    <DataSource ID="DS" TypeID="Windows!Microsoft.Windows.EventProvider">

      <LogName>HP OneView Management</LogName>

      <Expression>

        <And>

          <Expression>

            <SimpleExpression>

              <ValueExpression>

                <XPathQuery Type="String">PublisherName</XPathQuery>

              </ValueExpression>

              <Operator>Equal</Operator>

              <ValueExpression>

                <Value Type="String">HP OneView Event Manager-Server</Value>

              </ValueExpression>

            </SimpleExpression>

          </Expression>

          <Expression>

            <RegExExpression>

              <ValueExpression>

                <XPathQuery>EventDisplayNumber</XPathQuery>

              </ValueExpression>

              <Operator>MatchesMOM2005BooleanRegularExpression</Operator>

              <Pattern>^(6017|6040)$</Pattern>

            </RegExExpression>

          </Expression>

          <Expression>

            <SimpleExpression>

              <ValueExpression>

                <XPathQuery Type="String">Params/Param[2]</XPathQuery>

              </ValueExpression>

              <Operator>Equal</Operator>

              <ValueExpression>

                <Value Type="String">$Target/Property[Type="HewlettPackard.Oneview.Server.HPProliantServer"]/ObjectID$</Value>

              </ValueExpression>

            </SimpleExpression>

          </Expression>

        </And>

      </Expression>

    </DataSource>

  </DataSources>

  <WriteActions>

    <WriteAction ID="GenerateAlert" TypeID="Health!System.Health.GenerateAlert">

      <Priority>2</Priority>

      <Severity>2</Severity>

      <AlertName>Temperature failed and system shutdown.</AlertName>

      <AlertDescription>$Data/EventDescription$</AlertDescription>

      <AlertOwner/>

      <Suppression>

        <SuppressionValue>$Data/Params/Param[2]$</SuppressionValue>

      </Suppression>

    </WriteAction>

  </WriteActions>

</Rule>