Home
  •  

Phase Load Status

SCUtils.APC.PDU2.OutletMetered.Monitor.rPDU2OutletMeteredStatusState (UnitMonitor)

Indicates the present load status of the Rack PDU phase being queried

Element properties:

TargetSCUtils.APC.PDU2.OutletMetered
Parent MonitorSystem.Health.AvailabilityState
CategoryAvailabilityHealth
EnabledTrue
Alert GenerateTrue
Alert SeverityMatchMonitorHealth
Alert PriorityNormal
Alert Auto ResolveTrue
Monitor TypeSCUtils.APC.PDU.MonitorType.ThreeLevel.StatusProbe
RemotableTrue
AccessibilityPublic
Alert Message
Metered Outlet Load Status

Name: {0}
Location: {1}
Primary Owner: {2}
IP : {3}
Value : {4}

Legend:
lowLoad (1),
normal (2),
nearOverload (3),
overload (4)
RunAsDefault

Source Code:

<UnitMonitor ID="SCUtils.APC.PDU2.OutletMetered.Monitor.rPDU2OutletMeteredStatusState" Accessibility="Public" Enabled="true" Target="SCUtils.APC.PDU2.OutletMetered" ParentMonitorID="Health!System.Health.AvailabilityState" Remotable="true" Priority="Normal" TypeID="SCUtils.APC.PDU.MonitorType.ThreeLevel.StatusProbe" ConfirmDelivery="true">

  <Category>AvailabilityHealth</Category>

  <AlertSettings AlertMessage="SCUtils.APC.PDU2.OutletMetered.Monitor.rPDU2OutletMeteredStatusState_AlertMessageResourceID">

    <AlertOnState>Warning</AlertOnState>

    <AutoResolve>true</AutoResolve>

    <AlertPriority>Normal</AlertPriority>

    <AlertSeverity>MatchMonitorHealth</AlertSeverity>

    <AlertParameters>

      <AlertParameter1>$Target/Host/Host/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/sysName$</AlertParameter1>

      <AlertParameter2>$Target/Host/Host/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/Location$</AlertParameter2>

      <AlertParameter3>$Target/Host/Host/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/PrimaryOwnerContact$</AlertParameter3>

      <AlertParameter4>$Target/Host/Host/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/SNMPAddress$</AlertParameter4>

      <AlertParameter5>$Data/Context/SnmpVarBinds/SnmpVarBind[1]/Value$</AlertParameter5>

    </AlertParameters>

  </AlertSettings>

  <OperationalStates>

    <OperationalState ID="SCUtils.APC.PDU2.OutletMetered.Monitor.rPDU2OutletMeteredStatusState.Success" MonitorTypeStateID="StatusSuccess" HealthState="Success"/>

    <OperationalState ID="SCUtils.APC.PDU2.OutletMetered.Monitor.rPDU2OutletMeteredStatusState.Error" MonitorTypeStateID="StatusError" HealthState="Error"/>

    <OperationalState ID="SCUtils.APC.PDU2.OutletMetered.Monitor.rPDU2OutletMeteredStatusState.Warning" MonitorTypeStateID="StatusWarning" HealthState="Warning"/>

  </OperationalStates>

  <Configuration>

    <IntervalSeconds>300</IntervalSeconds>

    <IPAddress>$Target/Host/Host/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/SNMPAddress$</IPAddress>

    <CommunityString>$RunAs[Name="NetworkLibrary!System.NetworkManagement.Snmp.MonitoringAccount"]/CommunityString$</CommunityString>

    <SnmpVersion>$Target/Host/Host/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/SNMPVersion$</SnmpVersion>

    <OID>.1.3.6.1.4.1.318.1.1.26.9.4.3.1.5.$Target/Property[Type="SCUtils.APC.PDU2.OutletMetered"]/Index$</OID>

    <ValueSuccess>(2)</ValueSuccess>

    <ValueWarning>^(1|3)$</ValueWarning>

    <ValueError>(4)</ValueError>

  </Configuration>

</UnitMonitor>