| | DisplayName | Description | ID | Target | Category | Enabled | Instance Name | Counter Name | Frequency | Event_ID | Event Source | Alert Generate | Alert Severity | Alert Priority | Remotable | Event Log |
|---|
 | Failed to allocate memory for the device block [BROADCOM_B57W2K_01] | Error message of driver of Broadcom LAN Adapter BCM57xx. Check system memory resource usage | Fujitsu.Servers.PRIMERGY.Rules.BROADCOM_B57W2K_01 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 1 | B57W2K | True | Error | High | True | System |
| Failed to allocate map registers [BROADCOM_B57W2K_02] | Error message of driver of Broadcom LAN Adapter BCM57xx | Fujitsu.Servers.PRIMERGY.Rules.BROADCOM_B57W2K_02 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 2 | B57W2K | True | Error | High | True | System |
| Failed to access configuration information [BROADCOM_B57W2K_03] | Error message of driver of Broadcom LAN Adapter BCM57xx. Re-install network driver | Fujitsu.Servers.PRIMERGY.Rules.BROADCOM_B57W2K_03 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 3 | B57W2K | True | Error | High | True | System |
| The network link is down [BROADCOM_B57W2K_04] | Error message of driver of Broadcom LAN Adapter BCM57xx.Check to make sure the network cable is properly connected | Fujitsu.Servers.PRIMERGY.Rules.BROADCOM_B57W2K_04 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 4 | B57W2K | True | Warning | Normal | True | System |
| Medium not supported [BROADCOM_B57W2K_12] | Error message of driver of Broadcom LAN Adapter BCM57xx | Fujitsu.Servers.PRIMERGY.Rules.BROADCOM_B57W2K_12 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12 | B57W2K | True | Error | High | True | System |
| Unable to register the interrupt service routine [BROADCOM_B57W2K_13] | Error message of driver of Broadcom LAN Adapter BCM57xx | Fujitsu.Servers.PRIMERGY.Rules.BROADCOM_B57W2K_13 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 13 | B57W2K | True | Error | High | True | System |
| Unable to map IO space [BROADCOM_B57W2K_14] | Error message of driver of Broadcom LAN Adapter BCM57xx | Fujitsu.Servers.PRIMERGY.Rules.BROADCOM_B57W2K_14 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 14 | B57W2K | True | Error | High | True | System |
| Cannot enter low-power mode because the driver may not be able to auto-negotiate the link down to 10Mbps [BROADCOM_B57W2K_17] | Error message of driver of Broadcom LAN Adapter BCM57xx | Fujitsu.Servers.PRIMERGY.Rules.BROADCOM_B57W2K_17 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 17 | B57W2K | True | Error | High | True | System |
| Unknown PHY detected. Using a default PHY initialization routine [BROADCOM_B57W2K_18] | Error message of driver of Broadcom LAN Adapter BCM57xx | Fujitsu.Servers.PRIMERGY.Rules.BROADCOM_B57W2K_18 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 18 | B57W2K | True | Error | High | True | System |
| This driver does not support this device [BROADCOM_B57W2K_19] | Error message of driver of Broadcom LAN Adapter BCM57xx. Upgrade to the latest driver | Fujitsu.Servers.PRIMERGY.Rules.BROADCOM_B57W2K_19 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 19 | B57W2K | True | Error | High | True | System |
| Driver initialization failed [BROADCOM_B57W2K_20] | Error message of driver of Broadcom LAN Adapter BCM57xx. | Fujitsu.Servers.PRIMERGY.Rules.BROADCOM_B57W2K_20 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 20 | B57W2K | True | Error | High | True | System |
| Unable to register with NDIS [BROADCOM_BT_02] | Error message of driver of Broadcom LAN Adapter BCM57xx | Fujitsu.Servers.PRIMERGY.Rules.BROADCOM_BT_02 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 2 | BT | True | Error | High | True | System |
| Unable to instantiate the management interface [BROADCOM_BT_03] | Error message of driver of Broadcom LAN Adapter BCM57xx | Fujitsu.Servers.PRIMERGY.Rules.BROADCOM_BT_03 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 3 | BT | True | Error | High | True | System |
| Unable to create symbolic link for the management interface [BROADCOM_BT_04] | Error message of driver of Broadcom LAN Adapter BCM57xx | Fujitsu.Servers.PRIMERGY.Rules.BROADCOM_BT_04 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 4 | BT | True | Error | High | True | System |
| Could not allocate memory for internal data structures [BROADCOM_BT_07] | Error message of driver of Broadcom LAN Adapter BCM57xx | Fujitsu.Servers.PRIMERGY.Rules.BROADCOM_BT_07 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 7 | BT | True | Error | High | True | System |
| Could not bind to adapter [BROADCOM_BT_08] | Error message of driver of Broadcom LAN Adapter BCM57xx | Fujitsu.Servers.PRIMERGY.Rules.BROADCOM_BT_08 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 8 | BT | True | Error | High | True | System |
| Network adapter is disconnected [BROADCOM_BT_10] | Error message of driver of Broadcom LAN Adapter BCM57xx | Fujitsu.Servers.PRIMERGY.Rules.BROADCOM_BT_10 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10 | BT | True | Warning | Normal | True | System |
| Broadcom Advanced Program Features Driver is NOT designed to run on this version of Operating System [BROADCOM_BT_12] | Error message of driver of Broadcom LAN Adapter BCM57xx | Fujitsu.Servers.PRIMERGY.Rules.BROADCOM_BT_12 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12 | BT | True | Error | High | True | System |
| Network adapter is disabled via management interface [BROADCOM_BT_16] | Error message of driver of Broadcom LAN Adapter BCM57xx | Fujitsu.Servers.PRIMERGY.Rules.BROADCOM_BT_16 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 16 | BT | True | Warning | Normal | True | System |
| Network adapter is de-activated and is no longer participating in network traffic [BROADCOM_BT_18] | Error message of driver of Broadcom LAN Adapter BCM57xx | Fujitsu.Servers.PRIMERGY.Rules.BROADCOM_BT_18 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 18 | BT | True | Warning | Normal | True | System |
| Thread allocation failed! [DDM_1] | DDM cannot control this device correctly because there is a lack of memory. | Fujitsu.Servers.PRIMERGY.Rules.DDM_1 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 1 | ddm | True | Warning | Normal | True | System |
| DW PxPxTxLx: Configuration error. Mirror size less used disk space. Data loss possible! [DDM_16] | The size of the disk, to which the data of the other disk of the DW group should be copied (Mirror) is less than all partitions listed in the partition-table of the source disk. | Fujitsu.Servers.PRIMERGY.Rules.DDM_16 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 16 | ddm | True | Warning | Normal | True | System |
| MP PxPxTxLx: failed and was disabled! [DDM_18] | DDM has detected a failure on this path. The path is not usable anymore. Recovering from error will be logged by event id 4354. | Fujitsu.Servers.PRIMERGY.Rules.DDM_18 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 18 | ddm | True | Warning | Normal | True | System |
| DW PxPxTxLx failed! [DDM_2] | DDM has discovered a failure at the device PxPxTxLx. The status of the device is set to error, and no data is written to this device anymore. | Fujitsu.Servers.PRIMERGY.Rules.DDM_2 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 2 | ddm | True | Warning | Normal | True | System |
| MP PxPxTxLx: Memory allocation problem! [DDM_21] | DDM cannot control this device correctly because there is a lack of memory. | Fujitsu.Servers.PRIMERGY.Rules.DDM_21 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 21 | ddm | True | Warning | Normal | True | System |
| MP PxPxTxLx: Device was removed / path gone! This path was removed by Plug and Play functions of the system, after an error was detected. [DDM_25] | This event may occur after event id 18, but may also appear without any other id. If the path reappears, this will be logged by event id 4354. | Fujitsu.Servers.PRIMERGY.Rules.DDM_25 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 25 | ddm | True | Warning | Normal | True | System |
| DDM PxPxTxLx: Device had signature that was already found for another disk! [DDM_26] | All disks should have signatures (stored in the Master Boot Record (MBR)), which are unique to the system. Exception: The two pieces (or two disks) of a DuplexWrite group are identical and have the same signature. When this error is logged, DDM has found a disk which has the same signature as another disk in the system, and which are not members of a DuplexWrite group. That disk will be disabled and not be accessible. | Fujitsu.Servers.PRIMERGY.Rules.DDM_26 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 26 | ddm | True | Warning | Normal | True | System |
| DW PxPxTxLx: Memory allocation problem! [DDM_3] | DDM cannot control this device correctly because there is a lack of memory. | Fujitsu.Servers.PRIMERGY.Rules.DDM_3 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 3 | ddm | True | Warning | Normal | True | System |
| DW PxPxTxLx: Signatures on piece0 and piece1 are different but cannot be restored. [DDM_4368] | This is a serious problem which cannot be fixed by the driver. It is necessary to repair signatures on both pieces by hand (i.e. with ddmutil). | Fujitsu.Servers.PRIMERGY.Rules.DDM_4368 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 4368 | ddm | True | Warning | Normal | True | System |
| DW PxPxTxLx: Second try to write FastRecoverArray while both pieces are online! [DDM_4369] | There was an error keeping track of the changes written to disk. Delta Recover is disabled. | Fujitsu.Servers.PRIMERGY.Rules.DDM_4369 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 4369 | ddm | True | Error | High | True | System |
| DW PxPxTxLx: Someone has written a wrong Signature to MBR! [DDM_4370] | This could destroy a cluster, a cluster resource or a Duplex Write group! | Fujitsu.Servers.PRIMERGY.Rules.DDM_4370 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 4370 | ddm | True | Error | High | True | System |
| DW PxPxTxLx: Piece was removed. [DDM_4371] | Duplex Write piece was removed by Plug and Play event. | Fujitsu.Servers.PRIMERGY.Rules.DDM_4371 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 4371 | ddm | True | Warning | Normal | True | System |
| DW PxPxTxLx: The other piece is missing! [DDM_4373] | Logged only if 'StrictChecking' is enabled. In this case, IO to a DW group is only possible if both pieces of a DW group are accessible - if not this event entry is logged. | Fujitsu.Servers.PRIMERGY.Rules.DDM_4373 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 4373 | ddm | True | Warning | Normal | True | System |
| DW PxPxTxLx: The array for Delta Recover Information is already initialized. [DDM_4374] | FastRecoverEnabled is already set! This might be an internal error. Contact your local Fujitsu Helpdesk. | Fujitsu.Servers.PRIMERGY.Rules.DDM_4374 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 4374 | ddm | True | Warning | Normal | True | System |
| DW PxPxTxLx: DWLun for this piece is not set. [DDM_4376] | In data structure DeviceExtension is flag DWLun not set. | Fujitsu.Servers.PRIMERGY.Rules.DDM_4376 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 4376 | ddm | True | Warning | Normal | True | System |
| Fault tolerance for the RootDisk is not warranted anymore. [DDM_4384] | Fault tolerance for the RootDisk is not warranted anymore. | Fujitsu.Servers.PRIMERGY.Rules.DDM_4384 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 4384 | ddm | True | Error | High | True | System |
| DW PxPxTxLx: DuplexWrite has discovered a possible split brain situation, caused by a broken fibre channel connection. [DDM_4385] | In this situation, both nodes have access to one piece of this DW-Group. To avoid datacorruption, this may occur, if the node, which did not own this disk, does a failover of it, this piece was set to DISABLED. | Fujitsu.Servers.PRIMERGY.Rules.DDM_4385 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 4385 | ddm | True | Warning | Normal | True | System |
| DW PxPxTxLx: The second piece of this DW-Group is more recent, but it is not set to online, because there were write-commands sent to the first piece. [DDM_4387] | This event log may occur, if a piece of a DW-group is returned to its original system after it was attached to another system, which also runs with DDM. | Fujitsu.Servers.PRIMERGY.Rules.DDM_4387 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 4387 | ddm | True | Warning | Normal | True | System |
| DW PxPxTxLx: A command was retried after failure. [DDM_4388] | This event log may occur, if an access to a device in Failover Cluster (Windows Server 2008, Persistent Reservation) failed. | Fujitsu.Servers.PRIMERGY.Rules.DDM_4388 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 4388 | ddm | True | Warning | Normal | True | System |
| DW PxPxTxLx: A DuplexWrite RootDisk mirror (system mirror) was detected. Therefore the DuplexDataManager support for Microsoft Failover Clustering is switched off. [DDM_4389] | This event log may occur, if the Microsoft Failover Clustering feature is enabled and a DuplexWrite RootDisk mirror (system mirror) is configured. | Fujitsu.Servers.PRIMERGY.Rules.DDM_4389 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 4389 | ddm | True | Warning | Normal | True | System |
| Error: DuplexDataManager Service could not initialize. [DDM_5122] | Check for a correct installation. | Fujitsu.Servers.PRIMERGY.Rules.DDM_5122 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 5122 | ddm | True | Error | High | True | System |
| Error: DuplexDataManager Service - No NVRAM or BIOS access. [DDM_5123] | DuplexWrite cannot support an automatic reboot in case of system/boot disk failure. | Fujitsu.Servers.PRIMERGY.Rules.DDM_5123 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 5123 | ddm | True | Error | High | True | System |
| Error: DuplexDataManager Service - Consistency Check (SCSI address of both pieces) READ at block number failed. [DDM_5125] | The data for comparing will be read from both pieces via SCSI PassThrough commands. | Fujitsu.Servers.PRIMERGY.Rules.DDM_5125 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 5125 | ddm | True | Error | High | True | System |
| Error: DuplexDataManager Service - Consistency Check (SCSI addresses of both pieces) failed. The data is different at block number. [DDM_5126] | DDM SERVICE CONSISTENCY CHECK INTERRUPT | Fujitsu.Servers.PRIMERGY.Rules.DDM_5126 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 5126 | ddm | True | Error | High | True | System |
| Error: DuplexDataManager Service - Consistency Check (SCSI addresses of both pieces) failed (no normal termination). [DDM_5127] | DDM SERVICE CONSISTENCY CHECK CATCH | Fujitsu.Servers.PRIMERGY.Rules.DDM_5127 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 5127 | ddm | True | Error | High | True | System |
| Error: DuplexDataManager Service - Consistency Check (SCSI addresses of both pieces) canceled at block number. There are different numbers of blocks found! [DDM_5129] | The consistency check is canceled by user. | Fujitsu.Servers.PRIMERGY.Rules.DDM_5129 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 5129 | ddm | True | Error | High | True | System |
| Error: DuplexDataManager Service - Consistency Check (SCSI addresses of both pieces) finished with different blocks found. [DDM_5131] | Consistency Check (SCSI addresses of both pieces) finished with different blocks found. | Fujitsu.Servers.PRIMERGY.Rules.DDM_5131 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 5131 | ddm | True | Error | High | True | System |
| Error: Error: DuplexDataManager Service - xxx. [DDM_5132] | Only used for development or debugging case! | Fujitsu.Servers.PRIMERGY.Rules.DDM_5132 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 5132 | ddm | True | Error | High | True | System |
| Error: DuplexDataManager Service - Found inconsistent signatures in DuplexWrite group www:xxx, yyy:zzz. [DDM_5133] | Please check if anyone changed the disk signature in the master boot record (MBR). Use ddmutil to fix this problem. | Fujitsu.Servers.PRIMERGY.Rules.DDM_5133 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 5133 | ddm | True | Error | High | True | System |
| Error: DuplexDataManager Service - Fatal error caught in a routine. [DDM_5135] | DDM SERVICE FATAL ERROR | Fujitsu.Servers.PRIMERGY.Rules.DDM_5135 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 5135 | ddm | True | Error | High | True | System |
| Error: DuplexDataManager Service - CloneData (port/path/target/lun) failed (no normal termination). [DDM_5138] | Please restart DuplexDataManager service. | Fujitsu.Servers.PRIMERGY.Rules.DDM_5138 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 5138 | ddm | True | Error | High | True | System |
| Error: DuplexDataManager Service - CloneData (port/path/target/lun of device) READ at block number failed. [DDM_5139] | DuplexDataManager Service - CloneData (4/0/2/0) READ at block number 254378 failed. | Fujitsu.Servers.PRIMERGY.Rules.DDM_5139 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 5139 | ddm | True | Error | High | True | System |
| Error: DuplexDataManager Service - CloneData (data) WRITE at block number failed. [DDM_5140] | DuplexDataManager Service - CloneData (4/0/2/0) WRITE at block number 254378 failed. | Fujitsu.Servers.PRIMERGY.Rules.DDM_5140 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 5140 | ddm | True | Error | High | True | System |
| Error: DuplexDataManager Service - CloneData (port/path/target/lun). [DDM_5144] | Terminate CloneData because status of source piece changed | Fujitsu.Servers.PRIMERGY.Rules.DDM_5144 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 5144 | ddm | True | Error | High | True | System |
| Warning: DuplexDataManager Service - Manage AutoAdjust xxx: Unexpected storage access path configuration (ctrl/port: yyy). [DDM_5146] | The feature AutoAdjust not released. | Fujitsu.Servers.PRIMERGY.Rules.DDM_5146 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 5146 | ddm | True | Warning | Normal | True | System |
| Warning: DuplexDataManager Service - Manage AutoAdjust xxx: Different access paths to storage -> activate yyy. [DDM_5147] | The feature AutoAdjust not released. | Fujitsu.Servers.PRIMERGY.Rules.DDM_5147 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 5147 | ddm | True | Warning | Normal | True | System |
| Error: DuplexDataManager Service - Due starting the DuplexDataManager service the process ddmwatch.exe is still running / hanging. [DDM_5151] | DDM SERVICE DDMWATCH RUNNING | Fujitsu.Servers.PRIMERGY.Rules.DDM_5151 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 5151 | ddm | True | Error | High | True | System |
| Error: DuplexDataManager Service - MultiPath configuration changed. The path is missing. [DDM_5152] | DDM SERVICE MONITOR | Fujitsu.Servers.PRIMERGY.Rules.DDM_5152 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 5152 | ddm | True | Error | High | True | System |
| Warning: DuplexDataManager Service. [DDM_5156] | DDM_SERVICE MPIO WARNING | Fujitsu.Servers.PRIMERGY.Rules.DDM_5156 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 5156 | ddm | True | Warning | Normal | True | System |
| Error: DuplexDataManager Service [DDM_5157] | DDM SERVICE MPIO ERROR | Fujitsu.Servers.PRIMERGY.Rules.DDM_5157 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 5157 | ddm | True | Error | High | True | System |
| Warning: DuplexDataManager Service - The Virtual Disk Service (VDS) is active. The Storage Manager for SANs may produce VDS error entries in the system event log. [DDM_5158] | DDM SERVICE VDS ACTIVE | Fujitsu.Servers.PRIMERGY.Rules.DDM_5158 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 5158 | ddm | True | Warning | Normal | True | System |
| Error: DuplexDataManager Service - Found inconsistent Disk GUIDs in DuplexWrite group xxx. [DDM_5162] | Please check if anyone changed the Disk GUID in the GPT partition table. Use ddmutil to fix this problem. | Fujitsu.Servers.PRIMERGY.Rules.DDM_5162 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 5162 | ddm | True | Error | High | True | System |
| Error: DuplexDataManager Service - The MultiPath configuration changed. The disk identification is different: xxx. If the current configuration is correct, please acknowledge this configuration via the MMC snap-in to suppress this error message. [DDM_5163 | This error event only generated for acknowledged (stored) MultiPath configurations, where no disk signature available / accessible at the acknowledge time. Please check the MultiPath configuration for missing paths and devices. If the current configuration is correct, please acknowledge this configuration via the MMC snap-in to suppress this error message. | Fujitsu.Servers.PRIMERGY.Rules.DDM_5163 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 5163 | ddm | True | Error | High | True | System |
| Error: DuplexDataManager Service - The MultiPath configuration changed. Path(s) missing to disk: xxx. If the current configuration is correct, please acknowledge this configuration via the MMC snap-in to suppress this error message. [DDM_5164] | Please check the MultiPath configuration for missing paths and devices. If the current configuration is correct, please acknowledge this configuration via the MMC snap-in to suppress this error message. | Fujitsu.Servers.PRIMERGY.Rules.DDM_5164 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 5164 | ddm | True | Error | High | True | System |
| Error: DuplexDataManager Service - The MultiPath configuration changed. The disk: xxx is missing. If the current configuration is correct, please acknowledge this configuration via the MMC snap-in to suppress this error message. [DDM_5165] | Please check the MultiPath configuration for missing paths and devices. If the current configuration is correct, please acknowledge this configuration via the MMC snap-in to suppress this error message. | Fujitsu.Servers.PRIMERGY.Rules.DDM_5165 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 5165 | ddm | True | Error | High | True | System |
| Error: DuplexDataManager Service - The MultiPath configuration changed. There are xxx disk(s) missing. If the current configuration is correct, please acknowledge this configuration via the MMC snap-in to suppress this error message. [DDM_5166] | Please check the MultiPath configuration for missing paths and devices. If the current configuration is correct, please acknowledge this configuration via the MMC snap-in to suppress this error message. | Fujitsu.Servers.PRIMERGY.Rules.DDM_5166 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 5166 | ddm | True | Error | High | True | System |
| Error: DuplexDataManager Service - Failed to start x10sureIS configuration script: xxx - yyy [DDM_5168] | The DDM service calls the x10sureIS script to manage the DuplexWrite groups. Check if script is available and accessible. | Fujitsu.Servers.PRIMERGY.Rules.DDM_5168 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 5168 | ddm | True | Error | High | True | System |
| Error: DuplexDataManager Service - No any xxx disk for x10sureIS configuration found. [DDM_5169] | The DDM service does not find x10sureIS supported disks. Check iSCSI and disk configuration. | Fujitsu.Servers.PRIMERGY.Rules.DDM_5169 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 5169 | ddm | True | Error | High | True | System |
| Error: DuplexDataManager Service - In a Microsoft Failover Cluster environment a DuplexWrite RootDisk (system mirror) is not supported. [DDM_5171] | DuplexDataManager does support RootDisk (system mirror) and Microsoft Failover Cluster configurations, but not both together in a configuration. This restriction is only valid for Windows Server 2008 and newer. Please determine one configuration. | Fujitsu.Servers.PRIMERGY.Rules.DDM_5171 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 5171 | ddm | True | Error | High | True | System |
| Warning: DuplexDataManager Service - Failed to remove the Boot Flag on the degraded RootDisk (system mirror) piece xxx. [DDM_5174] | To prevent a boot inconsistent RootDisk piece, the Boot Flag is removed. The Boot Flag will be set to active when the recover is finished. | Fujitsu.Servers.PRIMERGY.Rules.DDM_5174 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 5174 | ddm | True | Warning | Normal | True | System |
| Warning: DuplexDataManager Service - Failed to update the Boot Flag on the online RootDisk (system mirror) piece xxx. [DDM_5176] | To prevent a boot inconsistent RootDisk piece, the Boot Flag is removed. The Boot Flag will be set to active when the recover is finished. | Fujitsu.Servers.PRIMERGY.Rules.DDM_5176 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 5176 | ddm | True | Warning | Normal | True | System |
| Error: DuplexDataManager Service - Any automatic fail-safe configuration stopped. Found a newer (most recent) operating system on disk xxx. [DDM_5178] | In an x10sureIS environment a DuplexWrite group was found which holds an operating system which is most recent. If the current booted operating system (RootDisk) should further be used, please delete the newer DuplexWrite group using the DuplexDataManager MMC snap-in. If the newer (most recent) operating system should be used, please shutdown the operating system and reconfigure the boot settings. (Additional a message box is displayed on all active terminals.) | Fujitsu.Servers.PRIMERGY.Rules.DDM_5178 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 5178 | ddm | True | Error | High | True | System |
| Error: DuplexDataManager Service - Any automatic fail-safe configuration stopped. Found a newer (most recent) DuplexWrite data group xxx. [DDM_5179] | In an x10sureIS environment a DuplexWrite group was found which holds the newer data lun which is most recent. If the current used DuplexWrite data group should further be used, please delete the newer DuplexWrite group using the DuplexDataManager MMC snap-in. If the newer (most recent) DuplexWrite data group should be used, please stop all I/O to the older one, delete this group, adapt the drive letters and start I/O. (Additional a message box is displayed on all active terminals.) | Fujitsu.Servers.PRIMERGY.Rules.DDM_5179 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 5179 | ddm | True | Error | High | True | System |
| Error: DuplexDataManager Service - The protection (change disk signature) of the xxx against the error/missing piece failed. [DDM_5180] | x10sureIS environment:
1. Change the disk signature of the RootDisk.
2. RootDisk: Update the boot menu (BCD).
One of these actions failed.
The operation system may not be bootable!
Please open a command box and type the following three commands:
"bcdedit.exe /set {current} device partition=c:"
"bcdedit.exe /set {current} osdevice partition=c:"
"bcdedit.exe /set {bootmgr} device partition=c:" | Fujitsu.Servers.PRIMERGY.Rules.DDM_5180 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 5180 | ddm | True | Error | High | True | System |
| Error: DuplexDataManager Service - An invalid configuration found. Found a DuplexWrite partner group xxx with 2 pieces. [DDM_5181] | In an x10sureIS environment found another DuplexWrite group with a same COD key with 2 pieces. Please the check DuplexWrite configuration. | Fujitsu.Servers.PRIMERGY.Rules.DDM_5181 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 5181 | ddm | True | Error | High | True | System |
| Error: DuplexDataManager Service - Delete of the xxx failed. In an x10sureIS environment one piece of the mirror is failed or missing. Therefore this piece ... [DDM_5184] | In an x10sureIS environment one piece of the mirror is failed or missing. Therefore this piece has to be deleted and the disk signature of the remaining piece has to be changed. This saves the operating system for unauthorized access to the error or missing piece. Please the check the configuration. | Fujitsu.Servers.PRIMERGY.Rules.DDM_5184 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 5184 | ddm | True | Error | High | True | System |
| Warning: DuplexDataManager Service - In an x10sureIS installation the DuplexWrite parameter 'Autostart Recover' should be enabled. [DDM_5186] | Please enable DuplexWrite 'Autostart Recover'. | Fujitsu.Servers.PRIMERGY.Rules.DDM_5186 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 5186 | ddm | True | Warning | Normal | True | System |
| Warning: DuplexDataManager Service - The update of the bootstat.dat files failed. [DDM_5189] | In a RootDisk configuration the DDM service updates the bootstat.dat file(s). Please check your RootDisk configuration. | Fujitsu.Servers.PRIMERGY.Rules.DDM_5189 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 5189 | ddm | True | Warning | Normal | True | System |
| Warning: DuplexDataManager Service - x10sure DuplexWrite Data Group Protection not supported! [DDM_5203] | In an x10sure environment the identity (Production Node or Control Node) is needed to protect the DuplexWrite data groups in a failover case. Please the check the configuration. | Fujitsu.Servers.PRIMERGY.Rules.DDM_5203 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 5203 | ddm | True | Warning | Normal | True | System |
| Error: DuplexDataManager Service - Delete missing piece of partner group xxx failed. This DuplexWrite group should be prepared (deleted) for using as mirror for the DuplexWrite group yyy. [DDM_5205] | Please the check the configuration. | Fujitsu.Servers.PRIMERGY.Rules.DDM_5205 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 5205 | ddm | True | Error | High | True | System |
| Error: DuplexDataManager Service - Delete missing piece of partner group xxx failed. This DuplexWrite group should be prepared (deleted) for using as mirror for the DuplexWrite group yyy. [DDM_5206] | Please the check the configuration. | Fujitsu.Servers.PRIMERGY.Rules.DDM_5206 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 5206 | ddm | True | Error | High | True | System |
| Error: DuplexDataManager Service - Any automatic fail-safe configuration stopped. The Boot Configuration Data (BCD) is not accessible. For the x10sureIS failover processing it is mandatory to access the BCD data. Please contact ... [DDM_5207] | Please the check the configuration or contact system operator immediately to solve this problem. (Additional a message box is displayed on all active terminals.) | Fujitsu.Servers.PRIMERGY.Rules.DDM_5207 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 5207 | ddm | True | Error | High | True | System |
| Error: DuplexDataManager Service - Any automatic fail-safe configuration stopped. The operating system is running on the disk xxx. The future mirror disk belongs to the DuplexWrite group yyy. Please solve this inconsistence. [DDM_5209] | Please use the DuplexDataManager MMC snap-in to solve this inconsistence. At least restart the DuplexDataManager service. (Additional a message box is displayed on all active terminals.) | Fujitsu.Servers.PRIMERGY.Rules.DDM_5209 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 5209 | ddm | True | Error | High | True | System |
| Error: DuplexDataManager Service - Any automatic fail-safe configuration stopped. The operating system is running on the disk xxx. Found the DuplexWrite group yyy on other port. Please solve this inconsistence. [DDM_5210] | Please use the DuplexDataManager MMC snap-in to solve this inconsistence. At least restart the DuplexDataManager service. (Additional a message box is displayed on all active terminals.) | Fujitsu.Servers.PRIMERGY.Rules.DDM_5210 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 5210 | ddm | True | Error | High | True | System |
| Error: DuplexDataManager Service - Any automatic fail-safe configuration stopped. An invalid x10sure environment found. [DDM_5211] | Please check the x10sureIS environment. (Additional a message box is displayed on all active terminals.) | Fujitsu.Servers.PRIMERGY.Rules.DDM_5211 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 5211 | ddm | True | Error | High | True | System |
| Warning: The DuplexWrite error piece xxx of the DuplexWrite group yyy is the most recent piece. Nevertheless it was set to error, because write commands were sent to the other piece, before the more recent piece appeared. If ... [DDM_5212] | The data on the more recent piece should be overwritten:
Disable the error piece and start recover.
The data on the more recent piece should be conserved:
If it is a system disk, the system has to be rebooted, while the first piece with older data must be disconnected. (Unmap LUN or change BIOS settings etc.) If it is a data disk, you can either reboot with disconnected older piece (see above) or follow these steps: Stop applications accessing this disk - remove drive letters - disable the online piece - set the error piece to online - start recover - reassign drive letters - start applications.
(Additional a message box is displayed on all active terminals.) | Fujitsu.Servers.PRIMERGY.Rules.DDM_5212 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 5212 | ddm | True | Warning | Normal | True | System |
| DW PxPxTxLx: No or invalid on disk configuration found! [DDM_6] | DDM cannot find the configuration data on this disk. | Fujitsu.Servers.PRIMERGY.Rules.DDM_6 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 6 | ddm | True | Warning | Normal | True | System |
| Error: DuplexDataManager MPIO event watch process - Fatal error caught in routine. [DDM_6144] | DDM WATCH PROCESS FATAL ERROR | Fujitsu.Servers.PRIMERGY.Rules.DDM_6144 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 6144 | ddm | True | Error | High | True | System |
| DW PxPxTxLx: Too many SCSI ports in system! [DDM_7] | DDM supports up to 256 ports. This number is reached now. DDM will not work in this case. | Fujitsu.Servers.PRIMERGY.Rules.DDM_7 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 7 | ddm | True | Warning | Normal | True | System |
| DW PxPxTxLx: Recover aborted! [DDM_8] | While a DuplexWrite group (DW group) was recovering, this recover process was aborted. | Fujitsu.Servers.PRIMERGY.Rules.DDM_8 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 8 | ddm | True | Warning | Normal | True | System |
| DW PxPxTxLx: Forced to be ONLINE! [DDM_9] | This piece of a DW-Group was set from a non-online state (error, disabled, recover) to online by the driver. This may happen, if the other piece was not online too. | Fujitsu.Servers.PRIMERGY.Rules.DDM_9 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 9 | ddm | True | Warning | Normal | True | System |
| Failure (SMART) has been predicted on a hard disk [HD_MIB_10750] | Sent if a failure (SMART) has been predicted on a hard disk. SMART predicts failure on disk | Fujitsu.Servers.PRIMERGY.Rules.HD_MIB_10750 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10750 | ServerView Agents | True | Error | High | True | Application |
| Adapter link down [INTEL_ANS_11] | Adapter link down | Fujitsu.Servers.PRIMERGY.Rules.INTEL_ANS_11 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 11 | iANSMiniport | True | Warning | Normal | True | System |
| Adapter has been deactivated from the team [INTEL_ANS_13] | Adapter has been deactivated from the team | Fujitsu.Servers.PRIMERGY.Rules.INTEL_ANS_13 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 13 | iANSMiniport | True | Warning | Normal | True | System |
| The last Team adapter has lost link. Network connection has been lost [INTEL_ANS_16] | The last Team adapter has lost link. Network connection has been lost | Fujitsu.Servers.PRIMERGY.Rules.INTEL_ANS_16 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 16 | iANSMiniport | True | Error | High | True | System |
| Unable to allocate required resources [INTEL_ANS_2] | Unable to allocate required resources. - Free some memory resources and restart. | Fujitsu.Servers.PRIMERGY.Rules.INTEL_ANS_2 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 2 | iANSMiniport | True | Error | High | True | System |
| Primary Adapter does not sense any Probes. Possible reason: partitioned Team [INTEL_ANS_22] | Primary Adapter does not sense any Probes. Possible reason: partitioned Team | Fujitsu.Servers.PRIMERGY.Rules.INTEL_ANS_22 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 22 | iANSMiniport | True | Warning | Normal | True | System |
| A Virtual Team Adapter failed to initialize [INTEL_ANS_23] | A Virtual Team Adapter failed to initialize | Fujitsu.Servers.PRIMERGY.Rules.INTEL_ANS_23 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 23 | iANSMiniport | True | Error | High | True | System |
| Adapter failed to join because it lacked IPSec TaskOffLoad capabilities [INTEL_ANS_24] | Adapter failed to join because it lacked IPSec TaskOffLoad capabilities | Fujitsu.Servers.PRIMERGY.Rules.INTEL_ANS_24 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 24 | iANSMiniport | True | Error | High | True | System |
| Adapter failed to join because it lacked TCP CheckSum TaskOffLoad capabilities [INTEL_ANS_25] | Adapter failed to join because it lacked TCP CheckSum TaskOffLoad capabilities | Fujitsu.Servers.PRIMERGY.Rules.INTEL_ANS_25 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 25 | iANSMiniport | True | Error | High | True | System |
| Adapter failed to join because it lacked TCP LargeSend TaskOffLoad capabilities [INTEL_ANS_26] | Adapter failed to join because it lacked TCP LargeSend TaskOffLoad capabilities | Fujitsu.Servers.PRIMERGY.Rules.INTEL_ANS_26 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 26 | iANSMiniport | True | Error | High | True | System |
| Adapter failed to join because of insufficient PnP capabilities [INTEL_ANS_27] | Adapter failed to join because of insufficient PnP capabilities | Fujitsu.Servers.PRIMERGY.Rules.INTEL_ANS_27 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 27 | iANSMiniport | True | Error | High | True | System |
| Adapter failed to join because MaxFrameSize too small [INTEL_ANS_28] | Adapter failed to join because MaxFrameSize too small | Fujitsu.Servers.PRIMERGY.Rules.INTEL_ANS_28 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 28 | iANSMiniport | True | Error | High | True | System |
| Adapter failed to join because MulticastList size too small [INTEL_ANS_29] | Adapter failed to join because MulticastList size too small | Fujitsu.Servers.PRIMERGY.Rules.INTEL_ANS_29 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 29 | iANSMiniport | True | Error | High | True | System |
| Unable to read required registry parameters [INTEL_ANS_3] | Unable to read required registry parameters. - Reconfigure the adapter team by double-clicking the PROSet icon in the control panel. | Fujitsu.Servers.PRIMERGY.Rules.INTEL_ANS_3 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 3 | iANSMiniport | True | Error | High | True | System |
| An illegal loopback situation has occurred on the adapter [INTEL_ANS_32] | An illegal loopback situation has occurred on the adapter. - Check the configuration to verify that all the adapters in the team are connected to 802.3ad compliant switch ports. | Fujitsu.Servers.PRIMERGY.Rules.INTEL_ANS_32 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 32 | iANSMiniport | True | Warning | Normal | True | System |
| No 802.3ad response from the link partner of any adapters in the team [INTEL_ANS_33] | No 802.3ad response from the link partner of any adapters in the team | Fujitsu.Servers.PRIMERGY.Rules.INTEL_ANS_33 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 33 | iANSMiniport | True | Warning | Normal | True | System |
| More than one Link Aggregation Group was found. Only one group will be functional within the team [INTEL_ANS_34] | More than one Link Aggregation Group was found. Only one group will be functional within the team | Fujitsu.Servers.PRIMERGY.Rules.INTEL_ANS_34 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 34 | iANSMiniport | True | Warning | Normal | True | System |
| Initializing Team with missing adapters [INTEL_ANS_35] | Initializing Team with missing adapters. - Check the configuration to verify that all the adapters are present and functioning. | Fujitsu.Servers.PRIMERGY.Rules.INTEL_ANS_35 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 35 | iANSMiniport | True | Warning | Normal | True | System |
| Initializing Team failed. Not all base drivers have the correct mac address, ANS ("Teaming") will not load [INTEL_ANS_36] | Initializing Team failed. Not all base drivers have the correct mac address, ANS ("Teaming") will not load | Fujitsu.Servers.PRIMERGY.Rules.INTEL_ANS_36 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 36 | iANSMiniport | True | Error | High | True | System |
| The driver failed to initialize properly. You may not be able to change the virtual adapter settings [INTEL_ANS_39] | The driver failed to initialize properly. You may not be able to change the virtual adapter settings. - To resolve, reload the driver. | Fujitsu.Servers.PRIMERGY.Rules.INTEL_ANS_39 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 39 | iANSMiniport | True | Warning | Normal | True | System |
| Unable to bind to physical adapter [INTEL_ANS_4] | Unable to bind to physical adapter. - Reconfigure the adapter team by double-clicking the PROSet icon in the control panel. | Fujitsu.Servers.PRIMERGY.Rules.INTEL_ANS_4 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 4 | iANSMiniport | True | Error | High | True | System |
| Virtual adapter unload process may have not completed successfully. Driver may not be unloaded [INTEL_ANS_40] | Virtual adapter unload process may have not completed successfully. Driver may not be unloaded. - To resolve, reboot the system. | Fujitsu.Servers.PRIMERGY.Rules.INTEL_ANS_40 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 40 | iANSMiniport | True | Warning | Normal | True | System |
| Adapter is improperly configured. The adapter cannot process the remote management features and be a member of an EtherChannel or 802.3ad network team at the same time [INTEL_ANS_41] | Adapter is improperly configured. The adapter cannot process the remote management features and be a member of an EtherChannel or 802.3ad network team at the same time | Fujitsu.Servers.PRIMERGY.Rules.INTEL_ANS_41 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 41 | iANSMiniport | True | Warning | Normal | True | System |
| Adapter is improperly configured. The adapter cannot process the remote management features and be a member of a network team at the same time [INTEL_ANS_42] | Adapter is improperly configured. The adapter cannot process the remote management features and be a member of a network team at the same time | Fujitsu.Servers.PRIMERGY.Rules.INTEL_ANS_42 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 42 | iANSMiniport | True | Warning | Normal | True | System |
| Adapter has been disabled in the team because its TCP Connection Offload capability was enabled. [INTEL_ANS_43] | Adapter has been disabled in the team because its TCP Connection Offload capability was enabled. | Fujitsu.Servers.PRIMERGY.Rules.INTEL_ANS_43 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 43 | iANSMiniport | True | Error | High | True | System |
| Unable to initialize an adapter team [INTEL_ANS_5] | Unable to initialize an adapter team. - Reconfigure the adapter team by double-clicking the PROSet icon in the control panel. | Fujitsu.Servers.PRIMERGY.Rules.INTEL_ANS_5 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 5 | iANSMiniport | True | Error | High | True | System |
| Could not allocate memory for receive structures [INTEL_E1000_10] | Error message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_10 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10 | | True | Error | High | True | System |
| Could not allocate memory for receive descriptors [INTEL_E1000_11] | Error message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_11 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 11 | | True | Error | High | True | System |
| Could not allocate memory for receive buffers [INTEL_E1000_12] | Error message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_12 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12 | | True | Error | High | True | System |
| Could not establish link [INTEL_E1000_13] | Warning message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_13 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 13 | | True | Warning | Normal | True | System |
| The PCI BIOS has NOT properly configured the PRO/1000 adapter [INTEL_E1000_14] | Error message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_14 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 14 | | True | Error | High | True | System |
| The PCI BIOS has NOT properly configured the PRO/1000 adapter [INTEL_E1000_15] | Error message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_15 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 15 | | True | Error | High | True | System |
| The PCI BIOS has NOT properly configured the PRO/1000 adapter [INTEL_E1000_16] | Error message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_16 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 16 | | True | Error | High | True | System |
| The PCI BIOS has NOT properly configured the PRO/1000 adapter [INTEL_E1000_17] | Error message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_17 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 17 | | True | Error | High | True | System |
| The PRO/1000 adapter was not configured for bus mastering by the PCI BIOS [INTEL_E1000_18] | Error message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_18 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 18 | | True | Error | High | True | System |
| Could not allocate the NDIS receive packets necessary for operation [INTEL_E1000_19] | Error message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_19 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 19 | | True | Error | High | True | System |
| Could not allocate the NDIS receive buffers necessary for operation [INTEL_E1000_20] | Error message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_20 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 20 | | True | Error | High | True | System |
| The OS was unable to assign PCI resources to the PRO/1000 adapter [INTEL_E1000_21] | Error message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_21 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 21 | | True | Error | High | True | System |
| The driver was unable to claim PCI resources of this PRO/1000 adapter [INTEL_E1000_22] | Error message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_22 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 22 | | True | Error | High | True | System |
| The EEPROM on your PRO/1000 adapter may have errors [INTEL_E1000_23] | Error message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_23 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 23 | | True | Error | High | True | System |
| Could not start the PRO/1000 adapter [INTEL_E1000_24] | Error message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_24 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 24 | | True | Error | High | True | System |
| MDIX setting conflict with the AutoNeg Settings [INTEL_E1000_25] | Error message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_25 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 25 | | True | Warning | Normal | True | System |
| Link has been disconnected [INTEL_E1000_27] | Warning message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_27 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 27 | | True | Warning | Normal | True | System |
| Could not start the gigabit network connection [INTEL_E1000_29] | Error message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_29 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 29 | | True | Error | High | True | System |
| Link is set up for auto-negotiation but the link partner is not configured for auto-negotiation [INTEL_E1000_30] | Warning message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_30 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 30 | | True | Warning | Normal | True | System |
| Could not allocate all resources necessary for the high priority transmit queue [INTEL_E1000_37] | Warning message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_37 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 37 | | True | Warning | Normal | True | System |
| The driver failed to initialize properly [INTEL_E1000_38] | Warning message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_38 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 38 | | True | Warning | Normal | True | System |
| Adapter unload process may have not completed successfully [INTEL_E1000_39] | Warning message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_39 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 39 | | True | Warning | Normal | True | System |
| Could not find a PRO/1000 adapter [INTEL_E1000_4] | Error message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_4 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 4 | | True | Error | High | True | System |
| Driver could not determine which PRO/1000 adapter to load on [INTEL_E1000_5] | Error message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_5 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 5 | | True | Error | High | True | System |
| Could not allocate the MAP REGISTERS necessary for operation [INTEL_E1000_6] | Error message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_6 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 6 | | True | Error | High | True | System |
| Could not assign an interrupt for the PRO/1000 [INTEL_E1000_7] | Error message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_7 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 7 | | True | Error | High | True | System |
| Could not allocate memory necessary for operation [INTEL_E1000_8] | Error message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_8 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 8 | | True | Error | High | True | System |
| Could not find a supported gigabit network connection [INTEL_E1000_8196] | Error message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_8196 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 8196 | | True | Error | High | True | System |
| Driver could not determine which supported gigabit network connection to load on [INTEL_E1000_8197] | Error message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_8197 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 8197 | | True | Error | High | True | System |
| Could not allocate the MAP REGISTERS necessary for operation [INTEL_E1000_8198] | Error message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_8198 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 8198 | | True | Error | High | True | System |
| Could not assign an interrupt for the supported gigabit network connection [INTEL_E1000_8199] | Error message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_8199 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 8199 | | True | Error | High | True | System |
| Could not allocate memory necessary for operation [INTEL_E1000_8199] | Error message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_8200 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 8200 | | True | Error | High | True | System |
| Could not allocate shared memory necessary for operation [INTEL_E1000_8201] | Error message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_8201 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 8201 | | True | Error | High | True | System |
| Could not allocate memory for receive structures [INTEL_E1000_8202] | Error message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_8202 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 8202 | | True | Error | High | True | System |
| Could not allocate memory for receive descriptors [INTEL_E1000_8203] | Error message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_8203 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 8203 | | True | Error | High | True | System |
| Could not allocate memory for receive buffers [INTEL_E1000_8204] | Error message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_8204 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 8204 | | True | Error | High | True | System |
| Could not establish link [INTEL_E1000_8205] | Warning message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_8205 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 8205 | | True | Warning | Normal | True | System |
| The PCI BIOS has NOT properly configured the gigabit network connection [INTEL_E1000_8206] | Error message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_8206 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 8206 | | True | Error | High | True | System |
| The PCI BIOS has NOT properly configured the gigabit network connection [INTEL_E1000_8207] | Error message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_8207 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 8207 | | True | Error | High | True | System |
| The PCI BIOS has NOT properly configured the gigabit network connection [INTEL_E1000_8208] | Error message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_8208 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 8208 | | True | Error | High | True | System |
| The PCI BIOS has NOT properly configured the gigabit network connection [INTEL_E1000_8209] | Error message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_8209 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 8209 | | True | Error | High | True | System |
| The gigabit network connection was not configured for bus mastering by the PCI BIOS [INTEL_E1000_8210] | Error message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_8210 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 8210 | | True | Error | High | True | System |
| Could not allocate the NDIS receive packets necessary for operation [INTEL_E1000_8211] | Error message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_8211 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 8211 | | True | Error | High | True | System |
| Could not allocate the NDIS receive buffers necessary for operation [INTEL_E1000_8212] | Error message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_8212 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 8212 | | True | Error | High | True | System |
| The OS was unable to assign PCI resources to the gigabit network connection [INTEL_E1000_8213] | Error message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_8213 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 8213 | | True | Error | High | True | System |
| The driver was unable to claim PCI resources of this gigabit network connection [INTEL_E1000_8214] | Error message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_8214 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 8214 | | True | Error | High | True | System |
| The EEPROM on your gigabit network connection may have errors [INTEL_E1000_8215] | Error message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_8215 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 8215 | | True | Error | High | True | System |
| Could not start the gigabit network connection [INTEL_E1000_8216] | Error message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_8216 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 8216 | | True | Error | High | True | System |
| MDIX setting conflict with the AutoNeg Settings. MDIX will not work [INTEL_E1000_8217] | Warning message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_8217 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 8217 | | True | Warning | Normal | True | System |
| Could not allocate shared memory necessary for operation [INTEL_E1000_9] | Error message of driver of Intel LAN Adapter PRO1000XT, PRO1000XF, PRO1000MT Desktop, PRO1000MT Dual, PRO1000MT, PRO1000P and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E1000_9 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 9 | | True | Error | High | True | System |
| Adapter Link Down [INTEL_E100B_4] | Warning message of driver of Intel LAN Adapter PRO100S Dual, PRO100S Server, PRO100 Server and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E100B_4 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 4 | E100B | True | Warning | Normal | True | System |
| Hardware failure detected [INTEL_E100B_6] | Error message of driver of Intel LAN Adapter PRO100S Dual, PRO100S Server, PRO100 Server and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E100B_6 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 6 | E100B | True | Error | High | True | System |
| EEprom corruption detected [INTEL_E100B_7] | Error message of driver of Intel LAN Adapter PRO100S Dual, PRO100S Server, PRO100 Server and Intel onboard LAN | Fujitsu.Servers.PRIMERGY.Rules.INTEL_E100B_7 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 7 | E100B | True | Error | High | True | System |
| The EEPROM on the network adapter may be corrupt. [INTEL_IE10G_23] | The EEPROM on the network adapter may be corrupt. - Visit "http://www.intel.com/p/en_US/support/network/" for assistance. | Fujitsu.Servers.PRIMERGY.Rules.INTEL_IE10G_23 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 23 | | True | Error | High | True | System |
| Unable to start the network adapter. [INTEL_IE10G_24] | Unable to start the network adapter. - Install the latest driver from "http://www.intel.com/p/en_US/support/network/". | Fujitsu.Servers.PRIMERGY.Rules.INTEL_IE10G_24 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 24 | | True | Error | High | True | System |
| Unable to start the network adapter. [INTEL_IE10G_25] | Unable to start the network adapter. - Install the latest driver from "http://www.intel.com/p/en_US/support/network/". | Fujitsu.Servers.PRIMERGY.Rules.INTEL_IE10G_25 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 25 | | True | Error | High | True | System |
| Network link is disconnected. [INTEL_IE10G_27] | Network link is disconnected. | Fujitsu.Servers.PRIMERGY.Rules.INTEL_IE10G_27 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 27 | | True | Warning | Normal | True | System |
| The network adapter is configured for auto-negotiation but the link partner is not. This may result in a duplex mismatch. [INTEL_IE10G_30] | The network adapter is configured for auto-negotiation but the link partner is not. This may result in a duplex mismatch. - Configure the link partner for auto-negotiation. | Fujitsu.Servers.PRIMERGY.Rules.INTEL_IE10G_30 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 30 | | True | Warning | Normal | True | System |
| PCI Express bandwidth available for this adapter is not sufficient for optimal performance. [INTEL_IE10G_37] | PCI Express bandwidth available for this adapter is not sufficient for optimal performance. - Move the adapter to a x8 PCI Express slot. | Fujitsu.Servers.PRIMERGY.Rules.INTEL_IE10G_37 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 37 | | True | Error | High | True | System |
| The driver failed to initialize properly. You may not be able to change the adapter settings. [INTEL_IE10G_38] | The driver failed to initialize properly. You may not be able to change the adapter settings. - Install the latest driver from "http://www.intel.com/p/en_US/support/network/" and restart the computer. | Fujitsu.Servers.PRIMERGY.Rules.INTEL_IE10G_38 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 38 | | True | Warning | Normal | True | System |
| The network adapter driver did not unload successfully. [INTEL_IE10G_39] | The network adapter driver did not unload successfully. - Install the latest driver from "http://www.intel.com/p/en_US/support/network/" and restart the computer. | Fujitsu.Servers.PRIMERGY.Rules.INTEL_IE10G_39 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 39 | | True | Warning | Normal | True | System |
| Could not allocate shared memory necessary for operation. [INTEL_IE10G_43] | Could not allocate shared memory necessary for operation. - Select the adapter in the network control panel. Click properties. Reduce the number of transmit and receive descriptors, then restart. | Fujitsu.Servers.PRIMERGY.Rules.INTEL_IE10G_43 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 43 | | True | Error | High | True | System |
| Could not allocate memory necessary for operation. [INTEL_IE10G_44] | Could not allocate memory necessary for operation. - Select the adapter in the network control panel. Click properties. Reduce the number of transmit and receive descriptors, then restart. | Fujitsu.Servers.PRIMERGY.Rules.INTEL_IE10G_44 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 44 | | True | Error | High | True | System |
| Could not allocate a resource pool necessary for operation. [INTEL_IE10G_45] | Could not allocate a resource pool necessary for operation. - Select the adapter in the network control panel. Click properties. Reduce the number of transmit and receive descriptors, then restart. | Fujitsu.Servers.PRIMERGY.Rules.INTEL_IE10G_45 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 45 | | True | Error | High | True | System |
| Could not initialize scatter-gather DMA resources necessary for operation. [INTEL_IE10G_46] | Could not initialize scatter-gather DMA resources necessary for operation. - Select the adapter in the network control panel. Click properties. Reduce the number of transmit descriptors and restart. | Fujitsu.Servers.PRIMERGY.Rules.INTEL_IE10G_46 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 46 | | True | Error | High | True | System |
| Could not map the network adapter flash. [INTEL_IE10G_47] | Could not map the network adapter flash. - Install the latest driver from "http://www.intel.com/p/en_US/support/network/". (Or) Try another slot. | Fujitsu.Servers.PRIMERGY.Rules.INTEL_IE10G_47 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 47 | | True | Error | High | True | System |
| The fan on the network adapter has failed. [INTEL_IE10G_48] | The fan on the network adapter has failed. - Power off the machine and replace the network adapter. | Fujitsu.Servers.PRIMERGY.Rules.INTEL_IE10G_48 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 48 | | True | Error | High | True | System |
| The driver was unable to load due to an unsupported SFP+ module installed in the adapter. [INTEL_IE10G_49] | The driver was unable to load due to an unsupported SFP+ module installed in the adapter. - Replace the module. (Or) Install the latest driver from "http://www.intel.com/p/en_US/support/network/". | Fujitsu.Servers.PRIMERGY.Rules.INTEL_IE10G_49 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 49 | | True | Error | High | True | System |
| The network adapter has been stopped because it has overheated. [INTEL_IE10G_50] | The network adapter has been stopped because it has overheated. - Restart the computer. If the problem persists, power off the computer and replace the network adapter. | Fujitsu.Servers.PRIMERGY.Rules.INTEL_IE10G_50 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 50 | | True | Error | High | True | System |
| Unable to allocate the map registers necessary for operation. [INTEL_IE10G_6] | Unable to allocate the map registers necessary for operation. - Select the adapter in the network control panel. Click properties. Reduce the number of transmit descriptors and restart. | Fujitsu.Servers.PRIMERGY.Rules.INTEL_IE10G_6 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 6 | | True | Error | High | True | System |
| Unable to allocate the map registers necessary for operation. [INTEL_IE10G_7] | Unable to allocate the map registers necessary for operation. - Select the adapter in the network control panel. Click properties. Reduce the number of transmit descriptors and restart. | Fujitsu.Servers.PRIMERGY.Rules.INTEL_IE10G_7 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 7 | | True | Error | High | True | System |
| SNMP cannot access cluster software [NTCLUSTER_MIB_10810] | The SNMP agent started but could not communicate with the cluster service | Fujitsu.Servers.PRIMERGY.Rules.NTCLUSTER_MIB_10810 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10810 | ServerView Agents | True | Error | High | True | Application |
| SNMP lost access to the cluster software [NTCLUSTER_MIB_10812] | The SNMP agent has lost communication with the cluster service | Fujitsu.Servers.PRIMERGY.Rules.NTCLUSTER_MIB_10812 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10812 | ServerView Agents | True | Error | High | True | Application |
| The node has changed its state [NTCLUSTER_MIB_10832] | A cluster node has changed its state | Fujitsu.Servers.PRIMERGY.Rules.NTCLUSTER_MIB_10832 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10832 | ServerView Agents | True | Error | High | True | Application |
| Group has changed its state [NTCLUSTER_MIB_10852] | A resource group has changed its state | Fujitsu.Servers.PRIMERGY.Rules.NTCLUSTER_MIB_10852 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10852 | ServerView Agents | True | Error | High | True | Application |
| Resource has changed its state [NTCLUSTER_MIB_10862] | A cluster resource has changed its state | Fujitsu.Servers.PRIMERGY.Rules.NTCLUSTER_MIB_10862 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10862 | ServerView Agents | True | Error | High | True | Application |
| Network has changed its state [NTCLUSTER_MIB_10912] | A Network has changed its state | Fujitsu.Servers.PRIMERGY.Rules.NTCLUSTER_MIB_10912 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10912 | ServerView Agents | True | Error | High | True | Application |
| Network interface has changed its state [NTCLUSTER_MIB_10922] | A network interface has changed its state | Fujitsu.Servers.PRIMERGY.Rules.NTCLUSTER_MIB_10922 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10922 | ServerView Agents | True | Error | High | True | Application |
| Cluster group has failed [NTCLUSTER_MIB_10932] | A cluster resource group has failed | Fujitsu.Servers.PRIMERGY.Rules.NTCLUSTER_MIB_10932 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10932 | ServerView Agents | True | Error | High | True | Application |
| Cluster resource has failed [NTCLUSTER_MIB_10935] | A cluster resource has failed | Fujitsu.Servers.PRIMERGY.Rules.NTCLUSTER_MIB_10935 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10935 | ServerView Agents | True | Error | High | True | Application |
| Cluster network unavailable [NTCLUSTER_MIB_10938] | A cluster network is unavailable | Fujitsu.Servers.PRIMERGY.Rules.NTCLUSTER_MIB_10938 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10938 | ServerView Agents | True | Error | High | True | Application |
| Cluster network interface has failed [NTCLUSTER_MIB_10940] | A cluster network interface has failed | Fujitsu.Servers.PRIMERGY.Rules.NTCLUSTER_MIB_10940 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10940 | ServerView Agents | True | Error | High | True | Application |
| Cluster network interface unreachable [NTCLUSTER_MIB_10941] | A cluster network interface is unreachable | Fujitsu.Servers.PRIMERGY.Rules.NTCLUSTER_MIB_10941 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10941 | ServerView Agents | True | Error | High | True | Application |
| Cluster network interface unavailable [NTCLUSTER_MIB_10942] | A cluster network interface is unavailable | Fujitsu.Servers.PRIMERGY.Rules.NTCLUSTER_MIB_10942 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10942 | ServerView Agents | True | Error | High | True | Application |
| Error Event from QLogic FC Adapter driver [QL2300_11] | Error Event from QLogic FC Adapter driver 'ql2300'. Detail event code is 4001xxxx, 4002xxxx, etc. | Fujitsu.Servers.PRIMERGY.Rules.QL2300_11 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 0 | | True | Error | High | True | System |
| The communication with management controller failed! [SC2_MIB_12001] | Communication with the Server Management controller lost. | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12001 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 12001 | ServerView Agents | True | Warning | Normal | True | Application |
| Controller selftest warning [SC2_MIB_12003] | The Server Management controller has detected an minor problem during selftest | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12003 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 12003 | ServerView Agents | True | Warning | Normal | True | Application |
| Controller selftest error [SC2_MIB_12004] | The Server Management controller has detected a problem during selftest | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12004 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12004 | ServerView Agents | True | Error | High | True | Application |
| A critical error happened while BIOS selftest [SC2_MIB_12005] | A critical error happened while BIOS selftest in cabinet nn of a server. See server management message log (recovery log) for detailed information. This error needs to be acknowledged to clear the error condition. | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12005 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12005 | ServerView Agents | True | Error | High | True | Application |
| The system was restarted after a severe problem [SC2_MIB_12006] | See server management message log (recovery log) for detailed information | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12006 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12006 | ServerView Agents | True | Error | High | True | Application |
| The indicated fan became critical [SC2_MIB_12013] | A Fan will fail in near future in a cabinet of server | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12013 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12013 | ServerView Agents | True | Error | High | True | Application |
| Fan failed in cabinet of server [SC2_MIB_12014] | The indicated fan failed | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12014 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12014 | ServerView Agents | True | Error | High | True | Application |
| Redundant fan failed in cabinet of server [SC2_MIB_12015] | A redundant fan failed in cabinet of server. System can become critical if another fan in this group fails. | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12015 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12015 | ServerView Agents | True | Error | High | True | Application |
| Temperature at sensor in cabinet of server has reached the warning level [SC2_MIB_12021] | The temperature of the indicated sensor has reached the warning level | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12021 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12021 | ServerView Agents | True | Error | High | True | Application |
| Temperature at sensor in cabinet of server has reached the critical level [SC2_MIB_12022] | The temperature of the indicated sensor is out of tolerance range. The system will shut down and power off if shutdown is enabled | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12022 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12022 | ServerView Agents | True | Error | High | True | Application |
| Temperature sensor is broken [SC2_MIB_12024] | Temperature sensor in cabinet of server is broken or not connected | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12024 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12024 | ServerView Agents | True | Error | High | True | Application |
| Insufficient operating power supplies available in cabinet at server [SC2_MIB_12033] | Power supply status has become critical | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12033 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12033 | ServerView Agents | True | Error | High | True | Application |
| Power supply in cabinet at server failed [SC2_MIB_12034] | One hot-replace power supply failed | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12034 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12034 | ServerView Agents | True | Error | High | True | Application |
| Redundant power supply in cabinet at server failed [SC2_MIB_12035] | One redundant hot-replace power supply failed. System may become critical if another power supply fails | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12035 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12035 | ServerView Agents | True | Error | High | True | Application |
| Power supply redundancy no longer available [SC2_MIB_12036] | Power supply redundancy in cabinet at server lost. System will become critical if a power supply fails. | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12036 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 12036 | ServerView Agents | True | Warning | Normal | True | Application |
| Critical temperature in power supply [SC2_MIB_12037] | Temperature of power supply has reached the critical level | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12037 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12037 | ServerView Agents | True | Error | High | True | Application |
| Fan failure prediction in power supply [SC2_MIB_12038] | Fan failure is predicted at power supply | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12038 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12038 | ServerView Agents | True | Error | High | True | Application |
| Fan failure in power supply [SC2_MIB_12039] | Fan failure in power supply | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12039 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12039 | ServerView Agents | True | Error | High | True | Application |
| AC failure in cabinet of server [SC2_MIB_12040] | Mains failed in the specified cabinet. This trap can only happen in storage extension cabinets without UPS or BBU. A server will not have time to send this trap. | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12040 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12040 | ServerView Agents | True | Error | High | True | Application |
| DC power failure in cabinet of server [SC2_MIB_12041] | DC power failed in the specified cabinet. This is the result of the system's power-good sensor monitoring. The system may stop when this condition occurs. | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12041 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12041 | ServerView Agents | True | Error | High | True | Application |
| AC failure. Cabinet is running on battery power since nn seconds [SC2_MIB_12042] | The UPS is operating on battery power or the power supply is drawing current from the backup battery unit (BBU). This trap is persistent and is resent at one minute intervals until the mains returns or the system is switched off. | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12042 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12042 | ServerView Agents | True | Error | High | True | Application |
| Power supply voltage is too low [SC2_MIB_12051] | Power supply voltage in cabinet at server is too low. | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12051 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12051 | ServerView Agents | True | Error | High | True | Application |
| Power supply voltage is too high [SC2_MIB_12052] | Power supply voltage in cabinet at server is too high | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12052 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12052 | ServerView Agents | True | Error | High | True | Application |
| Power supply voltage is out of range [SC2_MIB_12053] | Power supply voltage in cabinet at server is out of range | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12053 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12053 | ServerView Agents | True | Error | High | True | Application |
| Battery is predicted to fail [SC2_MIB_12054] | Battery voltage in a cabinet at a server: Battery is predicted to fail in near future. | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12054 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12054 | ServerView Agents | True | Error | High | True | Application |
| Uncorrectable memory error at address in cabinet of server [SC2_MIB_12061] | An uncorrectable memory error at specified address was detected | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12061 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12061 | ServerView Agents | True | Error | High | True | Application |
| Uncorrectable memory error at bank in cabinet of server [SC2_MIB_12063] | An uncorrectable memory error at a specified bank was detected | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12063 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12063 | ServerView Agents | True | Error | High | True | Application |
| Uncorrectable memory error at module in cabinet of server [SC2_MIB_12065] | A uncorrectable memory error at specified module was detected | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12065 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12065 | ServerView Agents | True | Error | High | True | Application |
| Uncorrectable memory error in cabinet of server [SC2_MIB_12067] | A uncorrectable memory error at unknown location was detected | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12067 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12067 | ServerView Agents | True | Error | High | True | Application |
| Memory module is predicted to fail [SC2_MIB_12068] | Memory module failure is predicted for module nn in cabinet of server | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12068 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12068 | ServerView Agents | True | Error | High | True | Application |
| A memory module is failing [SC2_MIB_12069] | A Memory module in cabinet of server is failing. Too many errors have occurred. | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12069 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12069 | ServerView Agents | True | Error | High | True | Application |
| A memory module had failed and was replaced by a hot-spare module [SC2_MIB_12070] | Memory module in a cabinet of server had failed and was replaced by a hot-spare module | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12070 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12070 | ServerView Agents | True | Error | High | True | Application |
| Too many correctable memory errors [SC2_MIB_12071] | Too many correctable memory errors in a cabinet at server. Error logging was disabled. | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12071 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 12071 | ServerView Agents | True | Warning | Normal | True | Application |
| Memory errors logging enabled again [SC2_MIB_12072] | Error logging was enabled again in cabinet at server (after being disabled because of too many errors) | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12072 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 12072 | ServerView Agents | True | Warning | Normal | True | Application |
| Memory module had failed and was replaced by a hot-spare module [SC2_MIB_12073] | A memory module in a cabinet of server had failed and was replaced by a hot-spare module | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12073 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12073 | ServerView Agents | True | Error | High | True | Application |
| A memory error caused loss of memory redundancy [SC2_MIB_12074] | Memory configuration in a cabinet of server has lost redundancy | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12074 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12074 | ServerView Agents | True | Error | High | True | Application |
| A CPU is predicted to fail (prefailure) [SC2_MIB_12081] | CPU failure is predicted for CPU in cabinet of server | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12081 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12081 | ServerView Agents | True | Error | High | True | Application |
| A CPU internal error (IERR) occurred [SC2_MIB_12082] | A CPU internal error (IERR) occurred | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12082 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12082 | ServerView Agents | True | Error | High | True | Application |
| A CPU is disabled by BIOS [SC2_MIB_12083] | A CPU is disabled by BIOS | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12083 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12083 | ServerView Agents | True | Error | High | True | Application |
| Boot retry counter is zero on server [SC2_MIB_12095] | This trap will be sent when a boot retry counter gets zero on power up | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12095 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12095 | ServerView Agents | True | Error | High | True | Application |
| The System Event Log on server in cabinet is full [SC2_MIB_12100] | The System Event Log (message log) is full. No more messages can be logged. This trap will not occur on wrap-around log types | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12100 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 12100 | ServerView Agents | True | Warning | Normal | True | Application |
| The System Event Log for cabinet at server has exceeded nn percent of its capacity [SC2_MIB_12101] | The warning threshold for the number of System Event Log entries has been exceeded | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12101 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 12101 | ServerView Agents | True | Warning | Normal | True | Application |
| An error was recorded on server before the management agents were started (boot phase) [SC2_MIB_12102] | This could have happened when an error occured before the server management agents were running or any error without a specific trap. See server management message log for detailed error description. | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12102 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12102 | ServerView Agents | True | Error | High | True | Application |
| The front door or housing was opened [SC2_MIB_12110] | The front door or housing of cabinet was opened on server | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12110 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12110 | ServerView Agents | True | Error | High | True | Application |
| The front door or housing was opened or closed [SC2_MIB_12112] | The front door or housing of cabinet was opened or closed | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12112 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12112 | ServerView Agents | True | Error | High | True | Application |
| PCI bus system/parity error [SC2_MIB_12113] | A PCI bus system or parity error happened in a cabinet on server | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12113 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12113 | ServerView Agents | True | Error | High | True | Application |
| Customer self service component changed to warning status [SC2_MIB_12120] | Warning status on a component in cabinet of server. This component may be replaced by the customer. | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12120 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12120 | ServerView Agents | True | Error | High | True | Application |
| Customer self service component changed to fail status [SC2_MIB_12121] | Fail status on a component in a cabinet of server. This component may be replaced by the customer. | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12121 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12121 | ServerView Agents | True | Error | High | True | Application |
| Customer self service component changed to warning status [SC2_MIB_12122] | Warning status on a component in a cabinet of server. This component may be replaced by the customer. | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12122 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12122 | ServerView Agents | True | Error | High | True | Application |
| Customer self service component changed to fail status [SC2_MIB_12123] | Fail status on a component of server. This component may be replaced by the customer. | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12123 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12123 | ServerView Agents | True | Error | High | True | Application |
| Power consumption limit changed to warning status [SC2_MIB_12131] | Power limit status has exceeded the warning threshold | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12131 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12131 | ServerView Agents | True | Error | High | True | Application |
| Power consumption limit changed to critical status [SC2_MIB_12132] | Power limit status has exceeded the critical threshold | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12132 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12132 | ServerView Agents | True | Error | High | True | Application |
| Driver Monitoring detected a warning event [SC2_MIB_12151] | Driver Monitoring detected a warning event | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12151 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 12151 | ServerView Agents | True | Warning | Normal | True | Application |
| Driver Monitoring detected an error event [SC2_MIB_12152] | Driver Monitoring detected an error event | Fujitsu.Servers.PRIMERGY.Rules.SC2_MIB_12152 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12152 | ServerView Agents | True | Error | High | True | Application |
| Write access of the ServerView RAID Manager revoked [SERVERVIEW_RAID_10002] | Write access of the ServerView RAID Manager revoked by user | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10002 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10002 | ServerView Raid | True | Warning | Normal | True | Application |
| BBU temperature out of range [SERVERVIEW_RAID_10003] | BBU temperature out of range | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10003 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10003 | ServerView Raid | True | Error | High | True | Application |
| BBU temperature unstable [SERVERVIEW_RAID_10004] | BBU temperature unstable | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10004 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10004 | ServerView Raid | True | Error | High | True | Application |
| BBU temperature above threshold [SERVERVIEW_RAID_10005] | BBU temperature above threshold | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10005 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10005 | ServerView Raid | True | Error | High | True | Application |
| BBU Voltage out of range [SERVERVIEW_RAID_10006] | BBU voltage out of range | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10006 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10006 | ServerView Raid | True | Error | High | True | Application |
| BBU Voltage unstable [SERVERVIEW_RAID_10007] | BBU voltage unstable | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10007 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10007 | ServerView Raid | True | Error | High | True | Application |
| BBU Voltage below threshold [SERVERVIEW_RAID_10008] | BBU voltage below threshold | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10008 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10008 | ServerView Raid | True | Error | High | True | Application |
| BBU communication error [SERVERVIEW_RAID_10009] | BBU communication error | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10009 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10009 | ServerView Raid | True | Error | High | True | Application |
| BBU failed [SERVERVIEW_RAID_10013] | BBU failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10013 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10013 | ServerView Raid | True | Error | High | True | Application |
| BBU fast charging failed [SERVERVIEW_RAID_10014] | BBU fast charging failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10014 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10014 | ServerView Raid | True | Error | High | True | Application |
| BBU charge count exceeded [SERVERVIEW_RAID_10015] | BBU charge count exceeded | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10015 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10015 | ServerView Raid | True | Warning | Normal | True | Application |
| BBU needs reconditioning [SERVERVIEW_RAID_10016] | BBU needs reconditioning | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10016 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10016 | ServerView Raid | True | Warning | Normal | True | Application |
| Disk marked offline [SERVERVIEW_RAID_10022] | Disk marked offline | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10022 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10022 | ServerView Raid | True | Error | High | True | Application |
| Disk timed out [SERVERVIEW_RAID_10023] | Disk timed out | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10023 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10023 | ServerView Raid | True | Error | High | True | Application |
| Global hotspare deleted on disk [SERVERVIEW_RAID_10025] | Global hot spare deleted on disk | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10025 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10025 | ServerView Raid | True | Warning | Normal | True | Application |
| Dedicated hotspare deleted on disk [SERVERVIEW_RAID_10027] | Dedicated hot spare deleted on disk | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10027 | Fujitsu.Servers.PRIMERGY.Server | AvailabilityHealth | False | | | 0 | 10027 | ServerView Raid | True | Warning | Normal | True | Application |
| Rebuild on disk failed [SERVERVIEW_RAID_10030] | Rebuild on disk failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10030 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10030 | ServerView Raid | True | Error | High | True | Application |
| Bad block on disk detected [SERVERVIEW_RAID_10031] | Bad block on disk detected | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10031 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10031 | ServerView Raid | True | Error | High | True | Application |
| Disk removed [SERVERVIEW_RAID_10033] | Disk removed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10033 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10033 | ServerView Raid | True | Warning | Normal | True | Application |
| Bad sector on disk detected [SERVERVIEW_RAID_10036] | Bad sector on disk detected | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10036 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10036 | ServerView Raid | True | Error | High | True | Application |
| COD I/O error on disk [SERVERVIEW_RAID_10037] | COD I/O error on disk | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10037 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10037 | ServerView Raid | True | Error | High | True | Application |
| Error on disk detected [SERVERVIEW_RAID_10038] | Error on disk detected | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10038 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10038 | ServerView Raid | True | Error | High | True | Application |
| Retry I/O on disk [SERVERVIEW_RAID_10040] | Retry I/O on disk | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10040 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10040 | ServerView Raid | True | Error | High | True | Application |
| ECC error on disk [SERVERVIEW_RAID_10041] | ECC error on disk | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10041 | Fujitsu.Servers.PRIMERGY.Server | AvailabilityHealth | True | | | 0 | 10041 | ServerView Raid | True | Error | High | True | Application |
| Media error on disk [SERVERVIEW_RAID_10043] | Media error on disk | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10043 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10043 | ServerView Raid | True | Error | High | True | Application |
| SMART Warning on disk [SERVERVIEW_RAID_10044] | SMART warning on disk | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10044 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10044 | ServerView Raid | True | Warning | Normal | True | Application |
| SMART error on disk [SERVERVIEW_RAID_10045] | SMART error on disk | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10045 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10045 | ServerView Raid | True | Warning | Normal | True | Application |
| Bad disk inserted in enclosure [SERVERVIEW_RAID_10046] | Bad disk inserted in enclosure | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10046 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10046 | ServerView Raid | True | Error | High | True | Application |
| Enclosure powered down [SERVERVIEW_RAID_10047] | Enclosure powered down | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10047 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10047 | ServerView Raid | True | Error | High | True | Application |
| Fan in enclosure failed [SERVERVIEW_RAID_10049] | Fan in enclosure failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10049 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10049 | ServerView Raid | True | Error | High | True | Application |
| Temperature sensor in enclosure above threshold [SERVERVIEW_RAID_10050] | Temperature sensor in enclosure above threshold | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10050 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10050 | ServerView Raid | True | Error | High | True | Application |
| Power supply in enclosure failed [SERVERVIEW_RAID_10051] | Power supply in enclosure failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10051 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10051 | ServerView Raid | True | Error | High | True | Application |
| 3.3V power failed for disk [SERVERVIEW_RAID_10052] | 3.3V power failed for disk | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10052 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10052 | ServerView Raid | True | Error | High | True | Application |
| 5.0V Power failed for disk [SERVERVIEW_RAID_10053] | 5.0V power failed for disk | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10053 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10053 | ServerView Raid | True | Error | High | True | Application |
| 12V Power failed for disk [SERVERVIEW_RAID_10054] | 12V power failed for disk | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10054 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10054 | ServerView Raid | True | Error | High | True | Application |
| Rebuild failed on logical drive [SERVERVIEW_RAID_10057] | Rebuild failed on logical drive | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10057 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10057 | ServerView Raid | True | Error | High | True | Application |
| Rebuild aborted on logical drive [SERVERVIEW_RAID_10058] | Rebuild aborted on logical drive | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10058 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10058 | ServerView Raid | True | Warning | Normal | True | Application |
| Consistency check failed on logical drive [SERVERVIEW_RAID_10062] | Consistency check failed on logical drive | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10062 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10062 | ServerView Raid | True | Error | High | True | Application |
| Consistency check aborted on logical drive [SERVERVIEW_RAID_10063] | Consistency check aborted on logical drive | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10063 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10063 | ServerView Raid | True | Warning | Normal | True | Application |
| Consistency check finished with errors on logical drive [SERVERVIEW_RAID_10066] | Consistency check finished with errors on logical drive | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10066 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10066 | ServerView Raid | True | Error | High | True | Application |
| Inconsistency detected on logical drive [SERVERVIEW_RAID_10067] | Inconsistency detected on logical drive | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10067 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10067 | ServerView Raid | True | Error | High | True | Application |
| Migration failed on logical drive [SERVERVIEW_RAID_10070] | Migration failed on logical drive | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10070 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10070 | ServerView Raid | True | Error | High | True | Application |
| Migration aborted on logical drive [SERVERVIEW_RAID_10071] | Migration aborted on logical drive | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10071 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10071 | ServerView Raid | True | Warning | Normal | True | Application |
| Patrol Read aborted [SERVERVIEW_RAID_10074] | Patrol Read aborted | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10074 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10074 | ServerView Raid | True | Warning | Normal | True | Application |
| Logical drive degraded [SERVERVIEW_RAID_10078] | Logical drive degraded | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10078 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10078 | ServerView Raid | True | Warning | Normal | True | Application |
| Logical drive failed [SERVERVIEW_RAID_10079] | Logical drive failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10079 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10079 | ServerView Raid | True | Error | High | True | Application |
| Logical drive deleted [SERVERVIEW_RAID_10081] | Logical drive deleted | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10081 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10081 | ServerView Raid | True | Warning | Normal | True | Application |
| Logical drive error on disk [SERVERVIEW_RAID_10083] | Logical drive error on disk | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10083 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10083 | ServerView Raid | True | Error | High | True | Application |
| Logical drive bad block detected [SERVERVIEW_RAID_10084] | Logical drive bad block detected | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10084 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10084 | ServerView Raid | True | Error | High | True | Application |
| BGI canceled on logical drive [SERVERVIEW_RAID_10089] | Background Initialization canceled on logical drive | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10089 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10089 | ServerView Raid | True | Warning | Normal | True | Application |
| Initialization canceled on logical drive [SERVERVIEW_RAID_10090] | Initialization canceled on logical drive | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10090 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10090 | ServerView Raid | True | Warning | Normal | True | Application |
| Hot spare operation on logical drive failed [SERVERVIEW_RAID_10093] | Hot spare operation on logical drive failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10093 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10093 | ServerView Raid | True | Error | High | True | Application |
| Logical drive forced from failed to degraded [SERVERVIEW_RAID_10094] | Logical drive forced from failed to degraded | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10094 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10094 | ServerView Raid | True | Error | High | True | Application |
| Alarm disabled [SERVERVIEW_RAID_10096] | Alarm disabled | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10096 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10096 | ServerView Raid | True | Warning | Normal | True | Application |
| Channel disabled [SERVERVIEW_RAID_10139] | Channel disabled | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10139 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10139 | ServerView Raid | True | Warning | Normal | True | Application |
| BBU voltage problem detected [SERVERVIEW_RAID_10151] | BBU voltage problem detected | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10151 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10151 | ServerView Raid | True | Error | High | True | Application |
| BBU temperature problem detected [SERVERVIEW_RAID_10151] | BBU temperature problem detected | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10152 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10152 | ServerView Raid | True | Error | High | True | Application |
| BBU failed [SERVERVIEW_RAID_10154] | BBU failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10154 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10154 | ServerView Raid | True | Error | High | True | Application |
| Disk error fixed [SERVERVIEW_RAID_10157] | Disk error fixed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10157 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10157 | ServerView Raid | True | Warning | Normal | True | Application |
| Reboot required [SERVERVIEW_RAID_10170] | Reboot required | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10170 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10170 | ServerView Raid | True | Error | High | True | Application |
| Unable to recover cache data from TBBU [SERVERVIEW_RAID_10195] | Unable to recover cache data from TBBU | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10195 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10195 | ServerView Raid | True | Error | High | True | Application |
| Cluster down; communication with peer lost [SERVERVIEW_RAID_10197] | Cluster down; communication with peer lost | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10197 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10197 | ServerView Raid | True | Error | High | True | Application |
| Controller cache discarded [SERVERVIEW_RAID_10200] | Controller cache discarded | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10200 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10200 | ServerView Raid | True | Error | High | True | Application |
| Unable to recover cache data [SERVERVIEW_RAID_10201] | Unable to recover cache data due to configuration mismatch | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10201 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10201 | ServerView Raid | True | Error | High | True | Application |
| Controller cache discarded [SERVERVIEW_RAID_10203] | Adapter cache discarded due to firmware version incompatibility | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10203 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10203 | ServerView Raid | True | Error | High | True | Application |
| Fatal firmware error [SERVERVIEW_RAID_10204] | Fatal firmware error | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10204 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10204 | ServerView Raid | True | Error | High | True | Application |
| Flash downloaded image corrupt [SERVERVIEW_RAID_10206] | Flash downloaded image corrupt | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10206 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10206 | ServerView Raid | True | Error | High | True | Application |
| Flash erase error [SERVERVIEW_RAID_10207] | Flash erase error | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10207 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10207 | ServerView Raid | True | Error | High | True | Application |
| Flash timeout during erase [SERVERVIEW_RAID_10208] | Flash timeout during erase | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10208 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10208 | ServerView Raid | True | Error | High | True | Application |
| Flash error [SERVERVIEW_RAID_10209] | Flash error | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10209 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10209 | ServerView Raid | True | Error | High | True | Application |
| Flash programming error [SERVERVIEW_RAID_10212] | Flash programming error | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10212 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10212 | ServerView Raid | True | Error | High | True | Application |
| Flash timeout during programming [SERVERVIEW_RAID_10213] | Flash timeout during programming | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10213 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10213 | ServerView Raid | True | Error | High | True | Application |
| Flash chip type unknown [SERVERVIEW_RAID_10214] | Flash chip type | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10214 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10214 | ServerView Raid | True | Warning | Normal | True | Application |
| Flash command set unknown [SERVERVIEW_RAID_10215] | Flash command set unknown | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10215 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10215 | ServerView Raid | True | Error | High | True | Application |
| Flash verify failure [SERVERVIEW_RAID_10216] | Flash verification failure | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10216 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10216 | ServerView Raid | True | Error | High | True | Application |
| Multi-bit ECC error [SERVERVIEW_RAID_10221] | Multi-bit ECC error | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10221 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10221 | ServerView Raid | True | Error | High | True | Application |
| Single-bit ECC error [SERVERVIEW_RAID_10222] | Single-bit ECC error | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10222 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10222 | ServerView Raid | True | Error | High | True | Application |
| Not enough controller memory [SERVERVIEW_RAID_10223] | Not enough controller memory (DIMM module / cache) | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10223 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10223 | ServerView Raid | True | Error | High | True | Application |
| BGI finished with uncorrectable errors [SERVERVIEW_RAID_10231] | Background Initialization completed with uncorrectable errors | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10231 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10231 | ServerView Raid | True | Error | High | True | Application |
| BGI detected uncorrectable double medium errors [SERVERVIEW_RAID_10232] | Background Initialization detected uncorrectable multiple medium errors (on a logical drive) | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10232 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10232 | ServerView Raid | True | Error | High | True | Application |
| BGI failed [SERVERVIEW_RAID_10233] | Background Initialization failed on logical drive | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10233 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10233 | ServerView Raid | True | Error | High | True | Application |
| Consistency check found inconsistent parity [SERVERVIEW_RAID_10237] | Consistency check found inconsistent parity | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10237 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10237 | ServerView Raid | True | Error | High | True | Application |
| Initialization failed [SERVERVIEW_RAID_10240] | Initialization failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10240 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10240 | ServerView Raid | True | Error | High | True | Application |
| Reconstruct detected uncorrectable double medium errors [SERVERVIEW_RAID_10245] | Migration detected uncorrectable multiple medium errors | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10245 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10245 | ServerView Raid | True | Error | High | True | Application |
| Reconstruction resume failed [SERVERVIEW_RAID_10248] | Resume migration of logical drive failed due to Configuration Mismatch | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10248 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10248 | ServerView Raid | True | Error | High | True | Application |
| Clear aborted [SERVERVIEW_RAID_10250] | Clear aborted | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10250 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10250 | ServerView Raid | True | Warning | Normal | True | Application |
| Clear failed [SERVERVIEW_RAID_10251] | Clear failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10251 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10251 | ServerView Raid | True | Error | High | True | Application |
| Error on disk [SERVERVIEW_RAID_10255] | Error on disk | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10255 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10255 | ServerView Raid | True | Error | High | True | Application |
| Hot Spare SMART polling failed [SERVERVIEW_RAID_10258] | Hot spare SMART polling failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10258 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10258 | ServerView Raid | True | Error | High | True | Application |
| Disk not supported [SERVERVIEW_RAID_10259] | Disk not supported | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10259 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10259 | ServerView Raid | True | Error | High | True | Application |
| Patrol Read found an uncorrectable medium error [SERVERVIEW_RAID_10262] | Patrol Read found an uncorrectable medium error | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10262 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10262 | ServerView Raid | True | Error | High | True | Application |
| Predictive failure [SERVERVIEW_RAID_10263] | Predictive failure | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10263 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10263 | ServerView Raid | True | Warning | Normal | True | Application |
| Puncturing bad block [SERVERVIEW_RAID_10264] | Puncturing bad block | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10264 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10264 | ServerView Raid | True | Error | High | True | Application |
| Rebuild aborted by user [SERVERVIEW_RAID_10265] | Rebuild aborted by user | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10265 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10265 | ServerView Raid | True | Warning | Normal | True | Application |
| Rebuild stopped [SERVERVIEW_RAID_10271] | Rebuild stopped due to loss of cluster ownership | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10271 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10271 | ServerView Raid | True | Error | High | True | Application |
| Reassign write operation failed [SERVERVIEW_RAID_10272] | Reassign write operation failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10272 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10272 | ServerView Raid | True | Error | High | True | Application |
| Unrecoverable medium error during rebuild [SERVERVIEW_RAID_10273] | Unrecoverable medium error during rebuild | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10273 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10273 | ServerView Raid | True | Error | High | True | Application |
| Unrecoverable medium error during recovery [SERVERVIEW_RAID_10275] | Unrecoverable medium error during recovery | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10275 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10275 | ServerView Raid | True | Error | High | True | Application |
| Redundant path broken [SERVERVIEW_RAID_10279] | Redundant path broken | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10279 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10279 | ServerView Raid | True | Error | High | True | Application |
| Dedicated Hot Spare no longer useful [SERVERVIEW_RAID_10281] | Dedicated hot spare no longer useful due to deleted array | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10281 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10281 | ServerView Raid | True | Warning | Normal | True | Application |
| SAS topology error: Loop detected [SERVERVIEW_RAID_10282] | SAS topology error: Loop detected | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10282 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10282 | ServerView Raid | True | Error | High | True | Application |
| SAS topology error: Unaddressable device [SERVERVIEW_RAID_10283] | SAS topology error: Unaddressable device | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10283 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10283 | ServerView Raid | True | Error | High | True | Application |
| SAS topology error: Multiple ports to the same SAS address [SERVERVIEW_RAID_10284] | SAS topology error: Multiple ports to the same SAS address | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10284 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10284 | ServerView Raid | True | Error | High | True | Application |
| SAS topology error: Expander error [SERVERVIEW_RAID_10285] | SAS topology error: Expander error | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10285 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10285 | ServerView Raid | True | Error | High | True | Application |
| SAS topology error: SMP timeout [SERVERVIEW_RAID_10286] | SAS topology error: SMP timeout | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10286 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10286 | ServerView Raid | True | Error | High | True | Application |
| SAS topology error: Out of route entries [SERVERVIEW_RAID_10286] | SAS topology error: Out of route entries | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10287 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10287 | ServerView Raid | True | Error | High | True | Application |
| SAS topology error: Index not found [SERVERVIEW_RAID_10288] | SAS topology error: Index not found | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10288 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10288 | ServerView Raid | True | Error | High | True | Application |
| SAS topology error: SMP function failed [SERVERVIEW_RAID_10289] | SAS topology error: SMP function failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10289 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10289 | ServerView Raid | True | Error | High | True | Application |
| SAS topology error: SMP CRC error [SERVERVIEW_RAID_10290] | SAS topology error: SMP CRC error | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10290 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10290 | ServerView Raid | True | Error | High | True | Application |
| SAS topology error: Multiple subtractive [SERVERVIEW_RAID_10291] | SAS topology error: Multiple subtractive | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10291 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10291 | ServerView Raid | True | Error | High | True | Application |
| SAS topology error: Table to table [SERVERVIEW_RAID_10292] | SAS topology error: Table to table | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10292 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10292 | ServerView Raid | True | Error | High | True | Application |
| SAS topology error: Multiple paths [SERVERVIEW_RAID_10293] | SAS topology error: Multiple paths | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10293 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10293 | ServerView Raid | True | Error | High | True | Application |
| Unable to access disk [SERVERVIEW_RAID_10294] | Unable to access disk | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10294 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10294 | ServerView Raid | True | Error | High | True | Application |
| Dedicated Hotspare not useful for all arrays [SERVERVIEW_RAID_10295] | Dedicated Hotspare not useful for all arrays | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10295 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10295 | ServerView Raid | True | Warning | Normal | True | Application |
| Global Hotspare does not cover all arrays [SERVERVIEW_RAID_10296] | Global Hotspare does not cover all arrays | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10296 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10296 | ServerView Raid | True | Warning | Normal | True | Application |
| Marking inconsistent [SERVERVIEW_RAID_10297] | Marking logical drive inconsistent due to active writes at shutdown | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10297 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10297 | ServerView Raid | True | Warning | Normal | True | Application |
| BBU has failed and cannot support data retention [SERVERVIEW_RAID_10303] | BBU has failed and cannot support data retention | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10303 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10303 | ServerView Raid | True | Error | High | True | Application |
| BBU relearn timed out [SERVERVIEW_RAID_10307] | BBU relearn timed out | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10307 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10307 | ServerView Raid | True | Warning | Normal | True | Application |
| BBU removed [SERVERVIEW_RAID_10314] | BBU removed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10314 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10314 | ServerView Raid | True | Warning | Normal | True | Application |
| Enclosure communication lost [SERVERVIEW_RAID_10317] | Enclosure communication lost | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10317 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10317 | ServerView Raid | True | Warning | Normal | True | Application |
| Enclosure fan removed [SERVERVIEW_RAID_10320] | Enclosure fan removed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10320 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10320 | ServerView Raid | True | Warning | Normal | True | Application |
| Enclosure EMM failed [SERVERVIEW_RAID_10321] | Enclosure EMM failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10321 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10321 | ServerView Raid | True | Error | High | True | Application |
| Enclosure EMM removed [SERVERVIEW_RAID_10323] | Enclosure EMM removed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10323 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10323 | ServerView Raid | True | Error | High | True | Application |
| Enclosure shutdown [SERVERVIEW_RAID_10324] | Enclosure shutdown | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10324 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10324 | ServerView Raid | True | Error | High | True | Application |
| Enclosure not supported; too many enclosures connected to port [SERVERVIEW_RAID_10324] | Enclosure not supported; too many enclosures connected to port | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10325 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10325 | ServerView Raid | True | Warning | Normal | True | Application |
| Enclosure firmware mismatch [SERVERVIEW_RAID_10325] | Enclosure firmware mismatch | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10326 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10326 | ServerView Raid | True | Error | High | True | Application |
| Enclosure sensor bad [SERVERVIEW_RAID_10327] | Enclosure sensor bad | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10327 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10327 | ServerView Raid | True | Error | High | True | Application |
| Enclosure PHY bad [SERVERVIEW_RAID_10328] | Enclosure PHY bad | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10328 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10328 | ServerView Raid | True | Error | High | True | Application |
| Enclosure is unstable [SERVERVIEW_RAID_10329] | Enclosure is unstable | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10329 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10329 | ServerView Raid | True | Error | High | True | Application |
| Enclosure hardware error [SERVERVIEW_RAID_10330] | Enclosure hardware error | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10330 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10330 | ServerView Raid | True | Error | High | True | Application |
| Enclosure not responding [SERVERVIEW_RAID_10331] | Enclosure not responding | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10331 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10331 | ServerView Raid | True | Error | High | True | Application |
| SAS/SATA mixing not supported in enclosure [SERVERVIEW_RAID_10332] | SAS/SATA mixing not supported in enclosure | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10332 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10332 | ServerView Raid | True | Warning | Normal | True | Application |
| Disk too small to be used for auto-rebuild [SERVERVIEW_RAID_10336] | Disk too small to be used for auto-rebuild | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10336 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10336 | ServerView Raid | True | Warning | Normal | True | Application |
| BBU disabled; changing Write-Back virtual disks to Write-Through [SERVERVIEW_RAID_10338] | BBU disabled; changing Write-Back virtual disks to Write-Through | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10338 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10338 | ServerView Raid | True | Warning | Normal | True | Application |
| Bad block table full [SERVERVIEW_RAID_10340] | Bad block table on drive is full; unable to log block | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10340 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10340 | ServerView Raid | True | Error | High | True | Application |
| MDC Aborted Due to Ownership Loss [SERVERVIEW_RAID_10341] | MDC aborted due to ownership loss | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10341 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10341 | ServerView Raid | True | Warning | Normal | True | Application |
| BGI aborted [SERVERVIEW_RAID_10342] | Background Initialization aborted due to ownership loss on logical drive | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10342 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10342 | ServerView Raid | True | Warning | Normal | True | Application |
| BBU/charger problems detected [SERVERVIEW_RAID_10343] | BBU/charger problems detected; SOH bad | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10343 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10343 | ServerView Raid | True | Error | High | True | Application |
| Single-bit ECC error; warning threshold exceeded [SERVERVIEW_RAID_10344] | Single-bit ECC error; warning threshold exceeded | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10344 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10344 | ServerView Raid | True | Warning | Normal | True | Application |
| Single-bit ECC error; critical threshold exceeded [SERVERVIEW_RAID_10345] | Single-bit ECC error; critical threshold exceeded | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10345 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10345 | ServerView Raid | True | Error | High | True | Application |
| Single-bit ECC error: further reporting disabled [SERVERVIEW_RAID_10346] | Single-bit ECC error: further reporting disabled | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10346 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10346 | ServerView Raid | True | Error | High | True | Application |
| Enclosure power supply cable removed [SERVERVIEW_RAID_10347] | Enclosure power supply cable removed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10347 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10347 | ServerView Raid | True | Warning | Normal | True | Application |
| BBU retention test failed [SERVERVIEW_RAID_10352] | BBU retention test failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10352 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10352 | ServerView Raid | True | Error | High | True | Application |
| NVRAM retention test failed [SERVERVIEW_RAID_10355] | NVRAM retention test failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10355 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10355 | ServerView Raid | True | Error | High | True | Application |
| Self check test failed [SERVERVIEW_RAID_10357] | Self check test failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10357 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10357 | ServerView Raid | True | Error | High | True | Application |
| NVRAM is corrupt; reinitializing [SERVERVIEW_RAID_10362] | NVRAM is corrupt; reinitializing | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10362 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10362 | ServerView Raid | True | Warning | Normal | True | Application |
| NVRAM mismatch occurred [SERVERVIEW_RAID_10363] | NVRAM mismatch occurred | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10363 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10363 | ServerView Raid | True | Warning | Normal | True | Application |
| SAS wide port lost link on PHY [SERVERVIEW_RAID_10364] | SAS wide port lost link on PHY | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10364 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10364 | ServerView Raid | True | Warning | Normal | True | Application |
| SAS port has exceeded the allowed error rate [SERVERVIEW_RAID_10366] | SAS port has exceeded the allowed error rate | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10366 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10366 | ServerView Raid | True | Warning | Normal | True | Application |
| Bad block reassigned [SERVERVIEW_RAID_10367] | Bad block reassigned | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10367 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10367 | ServerView Raid | True | Warning | Normal | True | Application |
| Enclosure firmware download failed [SERVERVIEW_RAID_10376] | Enclosure firmware download failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10376 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10376 | ServerView Raid | True | Error | High | True | Application |
| Disk is not certified [SERVERVIEW_RAID_10377] | Disk is not certified | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10377 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10377 | ServerView Raid | True | Warning | Normal | True | Application |
| Dirty cache data discarded by user [SERVERVIEW_RAID_10378] | Dirty cache data discarded by user | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10378 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10378 | ServerView Raid | True | Warning | Normal | True | Application |
| PDs missing from configuration at boot [SERVERVIEW_RAID_10379] | Disks missing from configuration at boot | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10379 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10379 | ServerView Raid | True | Warning | Normal | True | Application |
| VDs missing drives and will go offline at boot [SERVERVIEW_RAID_10380] | Logical drives missing drives and will go offline at boot | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10380 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10380 | ServerView Raid | True | Warning | Normal | True | Application |
| VDs missing at boot [SERVERVIEW_RAID_10381] | Logical drives missing at boot | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10381 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10381 | ServerView Raid | True | Warning | Normal | True | Application |
| Previous configuration completely missing at boot [SERVERVIEW_RAID_10382] | Previous configuration completely missing at boot | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10382 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10382 | ServerView Raid | True | Warning | Normal | True | Application |
| Logical Drive is partially degraded [SERVERVIEW_RAID_10388] | Logical drive partially degraded | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10388 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10388 | ServerView Raid | True | Warning | Normal | True | Application |
| BBU requires reconditioning [SERVERVIEW_RAID_10389] | BBU requires reconditioning; please initiate a LEARN cycle | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10389 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10389 | ServerView Raid | True | Warning | Normal | True | Application |
| MDC finished with errors on logical drive [SERVERVIEW_RAID_10398] | MDC finished with errors on logical drive | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10398 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10398 | ServerView Raid | True | Error | High | True | Application |
| Logical drive disabled because SAS drives not supported [SERVERVIEW_RAID_10401] | Logical drive disabled because SAS drives are not supported by this RAID key | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10401 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10401 | ServerView Raid | True | Warning | Normal | True | Application |
| Disks missing [SERVERVIEW_RAID_10402] | Disks missing | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10402 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10402 | ServerView Raid | True | Warning | Normal | True | Application |
| MDC failed on logical drive [SERVERVIEW_RAID_10408] | MDC failed on logical drive | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10408 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10408 | ServerView Raid | True | Error | High | True | Application |
| MDC aborted on logical drive [SERVERVIEW_RAID_10409] | MDC aborted on logical drive | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10409 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10409 | ServerView Raid | True | Warning | Normal | True | Application |
| State change from operational to degraded [SERVERVIEW_RAID_10412] | State change on logical drive from operational to degraded | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10412 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10412 | ServerView Raid | True | Warning | Normal | True | Application |
| State change from operational to partially degraded [SERVERVIEW_RAID_10413] | State change on logical drive from operational to partially degraded | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10413 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10413 | ServerView Raid | True | Warning | Normal | True | Application |
| State change from operational to failed [SERVERVIEW_RAID_10414] | State change on logical drive from operational to failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10414 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10414 | ServerView Raid | True | Error | High | True | Application |
| State change from degraded to degraded [SERVERVIEW_RAID_10416] | State change on logical drive from degraded to degraded | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10416 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10416 | ServerView Raid | True | Warning | Normal | True | Application |
| State change from degraded to partially degraded [SERVERVIEW_RAID_10417] | State change on logical drive from degraded to partially degraded | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10417 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10417 | ServerView Raid | True | Warning | Normal | True | Application |
| State change from degraded to failed [SERVERVIEW_RAID_10418] | State change on logical drive from degraded to failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10418 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10418 | ServerView Raid | True | Error | High | True | Application |
| State change from partially degraded to degraded [SERVERVIEW_RAID_10420] | State change on logical drive from partially degraded to degraded | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10420 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10420 | ServerView Raid | True | Warning | Normal | True | Application |
| State change from partially degraded to partially degraded [SERVERVIEW_RAID_10421] | State change on logical drive from partially degraded to partially degraded | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10421 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10421 | ServerView Raid | True | Warning | Normal | True | Application |
| State change from partially degraded to failed [SERVERVIEW_RAID_10422] | State change on logical drive from partially degraded to failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10422 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10422 | ServerView Raid | True | Error | High | True | Application |
| State change from failed to degraded [SERVERVIEW_RAID_10424] | State change on logical drive from failed to degraded | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10424 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10424 | ServerView Raid | True | Warning | Normal | True | Application |
| State change from failed to partially degraded [SERVERVIEW_RAID_10425] | State change on logical drive from failed to partially degraded | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10425 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10425 | ServerView Raid | True | Warning | Normal | True | Application |
| State change from failed to failed [SERVERVIEW_RAID_10426] | State change on logical drive from failed to failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10426 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10426 | ServerView Raid | True | Error | High | True | Application |
| State change by user from available to failed [SERVERVIEW_RAID_10427] | State change by user on disk from available to failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10427 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10427 | ServerView Raid | True | Error | High | True | Application |
| State change by user from failed to failed [SERVERVIEW_RAID_10432] | State change by user on disk from failed to failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10432 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10432 | ServerView Raid | True | Error | High | True | Application |
| State change by user from hotspare to failed [SERVERVIEW_RAID_10437] | State change by user on disk from hotspare to failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10437 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10437 | ServerView Raid | True | Error | High | True | Application |
| State change by user from rebuilding to failed [SERVERVIEW_RAID_10442] | State change by user on disk from rebuilding to failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10442 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10442 | ServerView Raid | True | Error | High | True | Application |
| State change by user from operational to failed [SERVERVIEW_RAID_10447] | State change by user on disk from operational to failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10447 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10447 | ServerView Raid | True | Error | High | True | Application |
| State change from available to failed [SERVERVIEW_RAID_10451] | State change on disk from available to failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10451 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10451 | ServerView Raid | True | Error | High | True | Application |
| State change from failed to failed [SERVERVIEW_RAID_10456] | State change on disk from failed to failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10456 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10456 | ServerView Raid | True | Error | High | True | Application |
| State change from hot spare to failed [SERVERVIEW_RAID_10461] | State change on disk from hot spare to failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10461 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10461 | ServerView Raid | True | Error | High | True | Application |
| State change from rebuilding to failed [SERVERVIEW_RAID_10466] | State change on disk from rebuilding to failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10466 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10466 | ServerView Raid | True | Error | High | True | Application |
| State change from operational to failed [SERVERVIEW_RAID_10471] | State change on disk from operational to failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10471 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10471 | ServerView Raid | True | Error | High | True | Application |
| MDC detected uncorrectable multiple medium errors on logical drive [SERVERVIEW_RAID_10475] | MDC detected uncorrectable multiple medium errors on logical drive | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10475 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10475 | ServerView Raid | True | Error | High | True | Application |
| Disk missing after reboot [SERVERVIEW_RAID_10476] | Disk missing after reboot | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10476 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10476 | ServerView Raid | True | Error | High | True | Application |
| Logical drive missing after reboot [SERVERVIEW_RAID_10477] | Logical drive missing after reboot | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10477 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10477 | ServerView Raid | True | Error | High | True | Application |
| Puncture enabled [SERVERVIEW_RAID_10480] | Puncturing of LBAs enabled | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10480 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10480 | ServerView Raid | True | Error | High | True | Application |
| Puncture disabled [SERVERVIEW_RAID_10481] | Puncturing of LBAs disabled | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10481 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10481 | ServerView Raid | True | Error | High | True | Application |
| Enclosure EMM not installed [SERVERVIEW_RAID_10482] | Enclosure EMM not installed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10482 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10482 | ServerView Raid | True | Error | High | True | Application |
| State change from available to offline [SERVERVIEW_RAID_10485] | State change on disk from available to offline | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10485 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10485 | ServerView Raid | True | Warning | Normal | True | Application |
| State change by user from available to offline [SERVERVIEW_RAID_10486] | State change by user on disk from available to offline | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10486 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10486 | ServerView Raid | True | Warning | Normal | True | Application |
| State change by user from failed to offline [SERVERVIEW_RAID_10487] | State change by user on disk from failed to offline | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10487 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10487 | ServerView Raid | True | Warning | Normal | True | Application |
| State change by user from hot spare to offline [SERVERVIEW_RAID_10488] | State change by user on disk from hot spare to offline | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10488 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10488 | ServerView Raid | True | Warning | Normal | True | Application |
| State change by user from offline to failed [SERVERVIEW_RAID_10490] | State change by user on disk from offline to failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10490 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10490 | ServerView Raid | True | Error | High | True | Application |
| State change by user from offline to offline [SERVERVIEW_RAID_10492] | State change by user on disk from offline to offline | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10492 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10492 | ServerView Raid | True | Warning | Normal | True | Application |
| State change by user from operational to offline [SERVERVIEW_RAID_10495] | State change by user on disk from operational to offline | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10495 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10495 | ServerView Raid | True | Warning | Normal | True | Application |
| State change by user from rebuilding to offline [SERVERVIEW_RAID_10496] | State change by user on disk from rebuilding to offline | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10496 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10496 | ServerView Raid | True | Warning | Normal | True | Application |
| State change from failed to offline [SERVERVIEW_RAID_10497] | State change on disk from failed to offline | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10497 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10497 | ServerView Raid | True | Warning | Normal | True | Application |
| State change from hot spare to offline [SERVERVIEW_RAID_10498] | State change on disk from hot spare to offline | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10498 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10498 | ServerView Raid | True | Warning | Normal | True | Application |
| State change from offline to failed [SERVERVIEW_RAID_10500] | State change on disk from offline to failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10500 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10500 | ServerView Raid | True | Error | High | True | Application |
| State change from offline to offline [SERVERVIEW_RAID_10502] | State change on disk from offline to offline | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10502 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10502 | ServerView Raid | True | Warning | Normal | True | Application |
| State change from operational to offline [SERVERVIEW_RAID_10505] | State change on disk from operational to offline | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10505 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10505 | ServerView Raid | True | Warning | Normal | True | Application |
| State change from rebuilding to offline [SERVERVIEW_RAID_10506] | State change on disk from rebuilding to offline | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10506 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10506 | ServerView Raid | True | Warning | Normal | True | Application |
| Data in cache not flushed during power up [SERVERVIEW_RAID_10508] | Data in cache not flushed during power up | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10508 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10508 | ServerView Raid | True | Error | High | True | Application |
| Logical drive error on disk media [SERVERVIEW_RAID_10512] | Logical drive error on disk | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10512 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10512 | ServerView Raid | True | Error | High | True | Application |
| Consistency check finished with errors on logical drive [SERVERVIEW_RAID_10514] | Consistency check finished with errors on logical drive | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10514 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10514 | ServerView Raid | True | Error | High | True | Application |
| Error on logical drive detected [SERVERVIEW_RAID_10515] | Error on logical drive detected | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10515 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10515 | ServerView Raid | True | Error | High | True | Application |
| Disk forced from failed to online [SERVERVIEW_RAID_10516] | Disk forced from failed to online | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10516 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10516 | ServerView Raid | True | Error | High | True | Application |
| Transfer speed of disk changed [SERVERVIEW_RAID_10517] | Transfer speed of disk changed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10517 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10517 | ServerView Raid | True | Warning | Normal | True | Application |
| SAS port lost link [SERVERVIEW_RAID_10518] | SAS port lost link | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10518 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10518 | ServerView Raid | True | Error | High | True | Application |
| Global affinity hot spare commissioned in a different enclosure [SERVERVIEW_RAID_10522] | Global affinity hot spare commissioned in a different enclosure | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10522 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10522 | ServerView Raid | True | Warning | Normal | True | Application |
| Foreign configuration table overflow [SERVERVIEW_RAID_10523] | Foreign configuration table overflow | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10523 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10523 | ServerView Raid | True | Warning | Normal | True | Application |
| Partial foreign configuration imported [SERVERVIEW_RAID_10524] | Partial foreign configuration imported, disks not imported | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10524 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10524 | ServerView Raid | True | Warning | Normal | True | Application |
| Adapter missing after reboot [SERVERVIEW_RAID_10526] | Adapter missing after reboot | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10526 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10526 | ServerView Raid | True | Error | High | True | Application |
| Rebuild aborted on disk [SERVERVIEW_RAID_10528] | Rebuild aborted on disk | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10528 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10528 | ServerView Raid | True | Warning | Normal | True | Application |
| Consistency check finished with correctable errors on logical drive [SERVERVIEW_RAID_10529] | Consistency check finished with correctable errors on logical drive | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10529 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10529 | ServerView Raid | True | Error | High | True | Application |
| Consistency check finished with uncorrectable errors on logical drive [SERVERVIEW_RAID_10530] | Consistency check finished with uncorrectable errors on logical drive | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10530 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10530 | ServerView Raid | True | Error | High | True | Application |
| MDC finished with uncorrectable errors on logical drive [SERVERVIEW_RAID_10532] | MDC finished with uncorrectable errors on logical drive | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10532 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10532 | ServerView Raid | True | Error | High | True | Application |
| Changed adapter property detected after reboot [SERVERVIEW_RAID_10534] | Changed adapter property detected after reboot | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10534 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10534 | ServerView Raid | True | Warning | Normal | True | Application |
| Command timeout on disk [SERVERVIEW_RAID_10536] | Command timeout on disk | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10536 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10536 | ServerView Raid | True | Warning | Normal | True | Application |
| Disk reset [SERVERVIEW_RAID_10537] | Disk reset | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10537 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10537 | ServerView Raid | True | Warning | Normal | True | Application |
| Bad block table on logical drive is 80\% full [SERVERVIEW_RAID_10538] | Bad block table on logical drive is 80\% full | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10538 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10538 | ServerView Raid | True | Warning | Normal | True | Application |
| Bad block table on logical drive is full [SERVERVIEW_RAID_10539] | Bad block table on logical drive is full; unable to log LBA | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10539 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10539 | ServerView Raid | True | Error | High | True | Application |
| Uncorrectable medium error logged for logical drive [SERVERVIEW_RAID_10540] | Uncorrectable medium error logged for logical drive | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10540 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10540 | ServerView Raid | True | Error | High | True | Application |
| Bad block table on disk is 100\% full [SERVERVIEW_RAID_10542] | Bad block table on disk is 100\% full | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10542 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10542 | ServerView Raid | True | Warning | Normal | True | Application |
| Bad block table on logical drive is 100\% full [SERVERVIEW_RAID_10543] | Bad block table on logical drive is 100\% full | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10543 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10543 | ServerView Raid | True | Warning | Normal | True | Application |
| Adapter needs replacement, faulty IOP detected [SERVERVIEW_RAID_10544] | Adapter needs replacement, faulty IOP detected | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10544 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10544 | ServerView Raid | True | Error | High | True | Application |
| Copyback failed on disk [SERVERVIEW_RAID_10551] | Copyback failed on disk | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10551 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10551 | ServerView Raid | True | Error | High | True | Application |
| Early power off warning was unsuccessful [SERVERVIEW_RAID_10552] | Early power off warning was unsuccessful | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10552 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10552 | ServerView Raid | True | Warning | Normal | True | Application |
| Foreign configuration metadata needs to be upgraded [SERVERVIEW_RAID_10556] | Foreign configuration metadata needs to be upgraded, may become incompatible | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10556 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10556 | ServerView Raid | True | Warning | Normal | True | Application |
| Redundant path broken [SERVERVIEW_RAID_10565] | Redundant path broken for disk | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10565 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10565 | ServerView Raid | True | Warning | Normal | True | Application |
| Redundant enclosure removed [SERVERVIEW_RAID_10567] | Redundant enclosure removed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10567 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10567 | ServerView Raid | True | Warning | Normal | True | Application |
| Patrol Read can't be started [SERVERVIEW_RAID_10568] | Patrol Read can't be started, all disks are either not online, or are in a logical drive with an active process, or are in an excluded logical drive | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10568 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10568 | ServerView Raid | True | Warning | Normal | True | Application |
| Copyback aborted on hot spare [SERVERVIEW_RAID_10570] | Copyback aborted on hot spare as hot spare needed for rebuild | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10570 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10570 | ServerView Raid | True | Error | High | True | Application |
| Copyback aborted for rebuild [SERVERVIEW_RAID_10571] | Copyback aborted as rebuild required in the array | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10571 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10571 | ServerView Raid | True | Warning | Normal | True | Application |
| Cache discarded for logical drive (missing or offline) [SERVERVIEW_RAID_10572] | Cache discarded for logical drive (missing or offline) | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10572 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10572 | ServerView Raid | True | Error | High | True | Application |
| Redundancy building failed on disk [SERVERVIEW_RAID_10575] | Redundancy building failed on disk | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10575 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10575 | ServerView Raid | True | Error | High | True | Application |
| Redundancy building aborted on disk [SERVERVIEW_RAID_10576] | Redundancy building aborted on disk | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10576 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10576 | ServerView Raid | True | Warning | Normal | True | Application |
| Firmware update timeout on disk [SERVERVIEW_RAID_10588] | Firmware update timeout on disk | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10588 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10588 | ServerView Raid | True | Warning | Normal | True | Application |
| Firmware update failed on disk [SERVERVIEW_RAID_10589] | Firmware update failed on disk | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10589 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10589 | ServerView Raid | True | Warning | Normal | True | Application |
| Periodic BBU relearn is pending [SERVERVIEW_RAID_10601] | Periodic BBU relearn is pending. Please initiate manual learn cycle as automatic learn is not enabled | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10601 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10601 | ServerView Raid | True | Warning | Normal | True | Application |
| Disk security key, re-key operation failed [SERVERVIEW_RAID_10606] | Disk security key, re-key operation failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10606 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10606 | ServerView Raid | True | Warning | Normal | True | Application |
| Disk security key is invalid [SERVERVIEW_RAID_10607] | Disk security key is invalid | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10607 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10607 | ServerView Raid | True | Warning | Normal | True | Application |
| Disk security key from escrow is invalid [SERVERVIEW_RAID_10609] | Disk security key from escrow is invalid | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10609 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10609 | ServerView Raid | True | Warning | Normal | True | Application |
| Logical drive is partially secured [SERVERVIEW_RAID_10611] | Logical drive is partially secured | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10611 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10611 | ServerView Raid | True | Warning | Normal | True | Application |
| Security subsystem problems detected for disk [SERVERVIEW_RAID_10616] | Security subsystem problems detected for disk | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10616 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10616 | ServerView Raid | True | Error | High | True | Application |
| Adapter cache pinned for missing or offline logical drive [SERVERVIEW_RAID_10617] | Adapter cache pinned for missing or offline logical drive | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10617 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10617 | ServerView Raid | True | Error | High | True | Application |
| Adapter cache pinned for missing or offline logical drives [SERVERVIEW_RAID_10618] | Adapter cache pinned for missing or offline logical drives | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10618 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10618 | ServerView Raid | True | Error | High | True | Application |
| MDC started on an inconsistent logical drive [SERVERVIEW_RAID_10621] | MDC started on an inconsistent logical drive | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10621 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10621 | ServerView Raid | True | Warning | Normal | True | Application |
| Disk security key failure, cannot access secured configuration [SERVERVIEW_RAID_10622] | Disk security key failure, cannot access secured configuration | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10622 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10622 | ServerView Raid | True | Warning | Normal | True | Application |
| Disk security pass phrase from user is invalid [SERVERVIEW_RAID_10623] | Disk security pass phrase from user is invalid | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10623 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10623 | ServerView Raid | True | Warning | Normal | True | Application |
| Abnormal shutdown sequence detected [SERVERVIEW_RAID_10625] | Abnormal shutdown sequence detected | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10625 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10625 | ServerView Raid | True | Warning | Normal | True | Application |
| Internal hardware error [SERVERVIEW_RAID_10626] | Internal hardware error | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10626 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10626 | ServerView Raid | True | Error | High | True | Application |
| Internal hardware error during POST [SERVERVIEW_RAID_10627] | Internal hardware error during POST | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10627 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10627 | ServerView Raid | True | Error | High | True | Application |
| Disk failed due to bad block table overflow [SERVERVIEW_RAID_10630] | Disk failed due to bad block table overflow | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10630 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10630 | ServerView Raid | True | Error | High | True | Application |
| Disk failure detected during POST [SERVERVIEW_RAID_10631] | Disk failure detected during POST | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10631 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10631 | ServerView Raid | True | Error | High | True | Application |
| Failure detected during POST [SERVERVIEW_RAID_10632] | Failure detected during POST | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10632 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10632 | ServerView Raid | True | Error | High | True | Application |
| Multiple failure on disk detected [SERVERVIEW_RAID_10633] | Multiple failure on disk detected | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10633 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10633 | ServerView Raid | True | Error | High | True | Application |
| Disk failure detected by Patrol Read [SERVERVIEW_RAID_10635] | Disk failure detected by Patrol Read | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10635 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10635 | ServerView Raid | True | Error | High | True | Application |
| Disk failure detected after successfully building redundancy [SERVERVIEW_RAID_10636] | Disk failure detected after successfully building redundancy | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10636 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10636 | ServerView Raid | True | Error | High | True | Application |
| Disk failure detected after aborting building redundancy [SERVERVIEW_RAID_10637] | Disk failure detected after aborting building redundancy | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10637 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10637 | ServerView Raid | True | Error | High | True | Application |
| Disk failed [SERVERVIEW_RAID_10638] | Disk failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10638 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10638 | ServerView Raid | True | Error | High | True | Application |
| Disk failed [SERVERVIEW_RAID_10639] | Disk failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10639 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10639 | ServerView Raid | True | Error | High | True | Application |
| Operation failed [SERVERVIEW_RAID_10658] | Operation failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10658 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10658 | ServerView Raid | True | Warning | Normal | True | Application |
| Array without logical drive left [SERVERVIEW_RAID_10660] | Array without logical drive left | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10660 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10660 | ServerView Raid | True | Warning | Normal | True | Application |
| Incorrect calendar parameter detected [SERVERVIEW_RAID_10661] | Incorrect calendar parameter detected | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10661 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10661 | ServerView Raid | True | Warning | Normal | True | Application |
| Copyback on logical drive aborted due to bad block table overflow [SERVERVIEW_RAID_10662] | Copyback on logical drive aborted due to bad block table overflow | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10662 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10662 | ServerView Raid | True | Error | High | True | Application |
| Redundant copy on logical drive aborted due to bad block table overflow [SERVERVIEW_RAID_10663] | Redundant copy on logical drive aborted due to bad block table overflow | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10663 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10663 | ServerView Raid | True | Error | High | True | Application |
| Bad block detected on disk [SERVERVIEW_RAID_10667] | Bad block detected on disk | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10667 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10667 | ServerView Raid | True | Warning | Normal | True | Application |
| Error detected on disk [SERVERVIEW_RAID_10672] | Error detected on disk | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10672 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10672 | ServerView Raid | True | Warning | Normal | True | Application |
| Disk location in logical drive changed [SERVERVIEW_RAID_10675] | Disk location in logical drive changed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10675 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10675 | ServerView Raid | True | Warning | Normal | True | Application |
| Driver error [SERVERVIEW_RAID_10680] | Driver error | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10680 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10680 | ServerView Raid | True | Warning | Normal | True | Application |
| Copyback aborted on disk [SERVERVIEW_RAID_10682] | Copyback aborted on disk | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10682 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10682 | ServerView Raid | True | Warning | Normal | True | Application |
| Internal hardware error [SERVERVIEW_RAID_10684] | Internal hardware error | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10684 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10684 | ServerView Raid | True | Warning | Normal | True | Application |
| Internal hardware error [SERVERVIEW_RAID_10685] | Internal hardware error | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10685 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10685 | ServerView Raid | True | Error | High | True | Application |
| Disk bad block table overflow error [SERVERVIEW_RAID_10686] | Disk bad block table overflow error | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10686 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10686 | ServerView Raid | True | Error | High | True | Application |
| Error with the remote BBU connector cable detected [SERVERVIEW_RAID_10687] | Error with the remote BBU connector cable detected | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10687 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10687 | ServerView Raid | True | Warning | Normal | True | Application |
| Multiple failure on disk detected during POST [SERVERVIEW_RAID_10688] | Multiple failure on disk detected during POST | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10688 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10688 | ServerView Raid | True | Error | High | True | Application |
| Disk failed due to SAS/SATA interface error rate too high [SERVERVIEW_RAID_10689] | Disk failed due to SAS/SATA interface error rate too high | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10689 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10689 | ServerView Raid | True | Error | High | True | Application |
| Logical drive degraded due to bad block table overflow [SERVERVIEW_RAID_10694] | Logical drive degraded due to bad block table overflow | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10694 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10694 | ServerView Raid | True | Error | High | True | Application |
| Disk failed due to write error detection by driver [SERVERVIEW_RAID_10695] | Disk failed due to write error detection by driver | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10695 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10695 | ServerView Raid | True | Error | High | True | Application |
| Abnormal capacity of disk in logical drive detected [SERVERVIEW_RAID_10696] | Abnormal capacity of disk in logical drive detected | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10696 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10696 | ServerView Raid | True | Warning | Normal | True | Application |
| Illegal type of disk in logical drive detected [SERVERVIEW_RAID_10697] | Illegal type of disk in logical drive detected | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10697 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10697 | ServerView Raid | True | Warning | Normal | True | Application |
| Internal PCI hardware error [SERVERVIEW_RAID_10700] | Internal PCI hardware error | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10700 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10700 | ServerView Raid | True | Error | High | True | Application |
| Bad block table was updated by disk [SERVERVIEW_RAID_10701] | Bad block table was updated by disk | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10701 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10701 | ServerView Raid | True | Warning | Normal | True | Application |
| Invalid disk on port during start up detected [SERVERVIEW_RAID_10702] | Invalid disk on port during start up detected | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10702 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10702 | ServerView Raid | True | Warning | Normal | True | Application |
| Invalid disk on port during hot swap detected [SERVERVIEW_RAID_10703] | Invalid disk on port during hot swap detected | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10703 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10703 | ServerView Raid | True | Warning | Normal | True | Application |
| SMART error on disk because internal error threshold on adapter is exceeded [SERVERVIEW_RAID_10704] | SMART error on disk because internal error threshold on adapter is exceeded | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10704 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10704 | ServerView Raid | True | Warning | Normal | True | Application |
| Firmware and driver version mismatch [SERVERVIEW_RAID_10705] | Firmware and driver version mismatch | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10705 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10705 | ServerView Raid | True | Warning | Normal | True | Application |
| Disk failed since it never entered ready state [SERVERVIEW_RAID_10711] | Disk failed since it never entered ready state | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10711 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10711 | ServerView Raid | True | Error | High | True | Application |
| Internal software interface error [SERVERVIEW_RAID_10712] | Internal software interface error | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10712 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10712 | ServerView Raid | True | Warning | Normal | True | Application |
| Device open error [SERVERVIEW_RAID_10713] | Device open error | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10713 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10713 | ServerView Raid | True | Warning | Normal | True | Application |
| Ioctl send error [SERVERVIEW_RAID_10714] | Ioctl send error | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10714 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10714 | ServerView Raid | True | Warning | Normal | True | Application |
| Insufficient application memory [SERVERVIEW_RAID_10715] | Insufficient application memory | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10715 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10715 | ServerView Raid | True | Warning | Normal | True | Application |
| System API error [SERVERVIEW_RAID_10716] | System API error | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10716 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10716 | ServerView Raid | True | Warning | Normal | True | Application |
| Firmware initialization failed [SERVERVIEW_RAID_10717] | Firmware initialization failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10717 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10717 | ServerView Raid | True | Error | High | True | Application |
| Firmware recovery failed [SERVERVIEW_RAID_10718] | Firmware recovery failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10718 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10718 | ServerView Raid | True | Error | High | True | Application |
| BBU requires recalibration [SERVERVIEW_RAID_10729] | BBU requires recalibration | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10729 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10729 | ServerView Raid | True | Warning | Normal | True | Application |
| Task for object cannot be started. The scheduler will try to start the task again later [SERVERVIEW_RAID_10732] | Task for object cannot be started. The scheduler will try to start the task again later | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10732 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10732 | ServerView Raid | True | Warning | Normal | True | Application |
| Task for object cannot be started. The scheduler has disabled the task [SERVERVIEW_RAID_10734] | Task for object cannot be started. The scheduler has disabled the task | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10734 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10734 | ServerView Raid | True | Error | High | True | Application |
| SAS topology error [SERVERVIEW_RAID_10736] | SAS topology error | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10736 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10736 | ServerView Raid | True | Error | High | True | Application |
| BBU requires recalibration automatically initiated [SERVERVIEW_RAID_10737] | BBU requires recalibration automatically initiated | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10737 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10737 | ServerView Raid | True | Warning | Normal | True | Application |
| Task for object could not be started at the normal execution time because the service or system was down [SERVERVIEW_RAID_10738] | Task for object could not be started at the normal execution time because the service or system was down | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10738 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10738 | ServerView Raid | True | Warning | Normal | True | Application |
| Task for object cannot be started. The task will be set to the next regular execution time [SERVERVIEW_RAID_10739] | Task for object cannot be started. The task will be set to the next regular execution time | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10739 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10739 | ServerView Raid | True | Warning | Normal | True | Application |
| State change from copyback to failed [SERVERVIEW_RAID_10755] | State change from copyback to failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10755 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10755 | ServerView Raid | True | Error | High | True | Application |
| State change from copyback to offline [SERVERVIEW_RAID_10757] | State change from copyback to offline | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10757 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10757 | ServerView Raid | True | Warning | Normal | True | Application |
| State change from JBOD to failed [SERVERVIEW_RAID_10763] | State change from JBOD to failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10763 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10763 | ServerView Raid | True | Error | High | True | Application |
| State change from JBOD to offline [SERVERVIEW_RAID_10765] | State change from JBOD to offline | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10765 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10765 | ServerView Raid | True | Warning | Normal | True | Application |
| State change by user from copyback to failed [SERVERVIEW_RAID_10781] | State change by user from copyback to failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10781 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10781 | ServerView Raid | True | Error | High | True | Application |
| State change by user from copyback to offline [SERVERVIEW_RAID_10783] | State change by user from copyback to offline | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10783 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10783 | ServerView Raid | True | Warning | Normal | True | Application |
| State change by user from JBOD to failed [SERVERVIEW_RAID_10789] | State change by user from JBOD to failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10789 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10789 | ServerView Raid | True | Error | High | True | Application |
| State change by user from JBOD to offline [SERVERVIEW_RAID_10791] | State change by user from JBOD to offline | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10791 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10791 | ServerView Raid | True | Warning | Normal | True | Application |
| Disk security failed to communicate with external key management system [SERVERVIEW_RAID_10801] | Disk security failed to communicate with external key management system | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10801 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10801 | ServerView Raid | True | Warning | Normal | True | Application |
| Logical drive secure failed [SERVERVIEW_RAID_10803] | Logical drive secure failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10803 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10803 | ServerView Raid | True | Warning | Normal | True | Application |
| Controller encountered a fatal error and was reset [SERVERVIEW_RAID_10804] | Controller encountered a fatal error and was reset | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10804 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10804 | ServerView Raid | True | Error | High | True | Application |
| Configuration command could not be committed to disk [SERVERVIEW_RAID_10805] | Configuration command could not be committed to disk | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10805 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10805 | ServerView Raid | True | Error | High | True | Application |
| Power state change failed on disk (from active to stopped) [SERVERVIEW_RAID_10807] | Power state change failed on disk (from active to stopped) | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10807 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10807 | ServerView Raid | True | Warning | Normal | True | Application |
| Power state change failed on disk (from stopped to active) [SERVERVIEW_RAID_10808] | Power state change failed on disk (from stopped to active) | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10808 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10808 | ServerView Raid | True | Warning | Normal | True | Application |
| Logical drive is not ready [SERVERVIEW_RAID_10809] | Logical drive is not ready | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10809 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10809 | ServerView Raid | True | Warning | Normal | True | Application |
| Adapter has been replaced during reboot [SERVERVIEW_RAID_10812] | Adapter has been replaced during reboot | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10812 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10812 | ServerView Raid | True | Warning | Normal | True | Application |
| Enclosure power supply removed [SERVERVIEW_RAID_10813] | Enclosure power supply removed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10813 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10813 | ServerView Raid | True | Warning | Normal | True | Application |
| Enclosure power supply turned off [SERVERVIEW_RAID_10814] | Enclosure power supply turned off | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10814 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10814 | ServerView Raid | True | Warning | Normal | True | Application |
| Enclosure temperature sensor below warning threshold [SERVERVIEW_RAID_10817] | Enclosure temperature sensor below warning threshold | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10817 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10817 | ServerView Raid | True | Warning | Normal | True | Application |
| Enclosure temperature sensor below error threshold [SERVERVIEW_RAID_10818] | Enclosure temperature sensor below error threshold | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10818 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10818 | ServerView Raid | True | Error | High | True | Application |
| Enclosure temperature sensor above warning threshold [SERVERVIEW_RAID_10819] | Enclosure temperature sensor above warning threshold | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10819 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10819 | ServerView Raid | True | Warning | Normal | True | Application |
| Enclosure temperature sensor above error threshold [SERVERVIEW_RAID_10820] | Enclosure temperature sensor above error threshold | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10820 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10820 | ServerView Raid | True | Error | High | True | Application |
| Power state change failed on disk (from active to transition) [SERVERVIEW_RAID_10822] | Power state change failed on disk (from active to transition) | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10822 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10822 | ServerView Raid | True | Warning | Normal | True | Application |
| Power state change failed on disk (from stopped to transition) [SERVERVIEW_RAID_10824] | Power state change failed on disk (from stopped to transition) | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10824 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10824 | ServerView Raid | True | Warning | Normal | True | Application |
| Power state change failed on disk (from transition to active) [SERVERVIEW_RAID_10826] | Power state change failed on disk (from transition to active) | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10826 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10826 | ServerView Raid | True | Warning | Normal | True | Application |
| Power state change failed on disk (from transition to stopped) [SERVERVIEW_RAID_10828] | Power state change failed on disk (from transition to stopped) | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10828 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10828 | ServerView Raid | True | Warning | Normal | True | Application |
| Reset on-board expander [SERVERVIEW_RAID_10829] | Reset on-board expander | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10829 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10829 | ServerView Raid | True | Warning | Normal | True | Application |
| Consistency check rejected on uninitialized logical drive [SERVERVIEW_RAID_10846] | Consistency check rejected on uninitialized logical drive | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10846 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10846 | ServerView Raid | True | Warning | Normal | True | Application |
| CacheCade(TM) capacity changed [SERVERVIEW_RAID_10852] | CacheCade(TM) capacity changed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10852 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10852 | ServerView Raid | True | Warning | Normal | True | Application |
| BBU life has degraded and cannot initiate transparent learn cycles [SERVERVIEW_RAID_10853] | BBU life has degraded and cannot initiate transparent learn cycles | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10853 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10853 | ServerView Raid | True | Warning | Normal | True | Application |
| Advanced software options serial number mismatched [SERVERVIEW_RAID_10857] | Advanced software options serial number mismatched | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10857 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10857 | ServerView Raid | True | Warning | Normal | True | Application |
| BBU cannot support data retention [SERVERVIEW_RAID_10858] | BBU cannot support data retention | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10858 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10858 | ServerView Raid | True | Warning | Normal | True | Application |
| Logical drive cannot transition to maximum power savings [SERVERVIEW_RAID_10860] | Logical drive cannot transition to maximum power savings | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10860 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10860 | ServerView Raid | True | Warning | Normal | True | Application |
| Disk link failed in SAS wide port [SERVERVIEW_RAID_10864] | Disk link failed in SAS wide port | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10864 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10864 | ServerView Raid | True | Warning | Normal | True | Application |
| FBU power pack is sub-optimal [SERVERVIEW_RAID_10867] | FBU power pack is sub-optimal | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10867 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10867 | ServerView Raid | True | Warning | Normal | True | Application |
| Foreign configuration auto-import did not import any drives [SERVERVIEW_RAID_10868] | Foreign configuration auto-import did not import any drives | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10868 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10868 | ServerView Raid | True | Warning | Normal | True | Application |
| FBU firmware update required [SERVERVIEW_RAID_10869] | FBU firmware update required | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10869 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10869 | ServerView Raid | True | Warning | Normal | True | Application |
| CacheCade(TM) capacity exceeds maximum allowed size [SERVERVIEW_RAID_10870] | CacheCade(TM) capacity exceeds maximum allowed size | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10870 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10870 | ServerView Raid | True | Warning | Normal | True | Application |
| Logical drive protection information lost [SERVERVIEW_RAID_10871] | Logical drive protection information lost | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10871 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10871 | ServerView Raid | True | Warning | Normal | True | Application |
| Diagnostics failed for disk [SERVERVIEW_RAID_10873] | Diagnostics failed for disk | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10873 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10873 | ServerView Raid | True | Error | High | True | Application |
| Erase failed on disk [SERVERVIEW_RAID_10890] | Erase failed on disk | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10890 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10890 | ServerView Raid | True | Error | High | True | Application |
| Erase failed on logical drive [SERVERVIEW_RAID_10895] | Erase failed on logical drive | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10895 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10895 | ServerView Raid | True | Error | High | True | Application |
| Potential leakage during erase on logical drive [SERVERVIEW_RAID_10899] | Potential leakage during erase on logical drive | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10899 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10899 | ServerView Raid | True | Warning | Normal | True | Application |
| BBU charging was suspended due to high BBU temperature [SERVERVIEW_RAID_10900] | BBU charging was suspended due to high BBU temperature | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10900 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10900 | ServerView Raid | True | Warning | Normal | True | Application |
| FBU firmware update failed [SERVERVIEW_RAID_10902] | FBU firmware update failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10902 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10902 | ServerView Raid | True | Warning | Normal | True | Application |
| Logical drive access blocked as cached data in CacheCade(TM) is unavailable [SERVERVIEW_RAID_10903] | Logical drive access blocked as cached data in CacheCade(TM) is unavailable | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10903 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10903 | ServerView Raid | True | Error | High | True | Application |
| CacheCade(TM) disassociate failed on logical drive [SERVERVIEW_RAID_10906] | CacheCade(TM) disassociate failed on logical drive | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10906 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10906 | ServerView Raid | True | Error | High | True | Application |
| Unexpected sense [SERVERVIEW_RAID_10909] | Unexpected sense | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10909 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10909 | ServerView Raid | True | Warning | Normal | True | Application |
| Unexpected sense [SERVERVIEW_RAID_10910] | Unexpected sense | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10910 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10910 | ServerView Raid | True | Error | High | True | Application |
| Advanced Software Options was deactivated for [SERVERVIEW_RAID_10914] | Advanced Software Options was deactivated for | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10914 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10914 | ServerView Raid | True | Warning | Normal | True | Application |
| Patrol Read aborted on disk [SERVERVIEW_RAID_10918] | Patrol Read aborted on disk | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10918 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10918 | ServerView Raid | True | Warning | Normal | True | Application |
| Transient error detected while communicating with disk [SERVERVIEW_RAID_10919] | Transient error detected while communicating with disk | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10919 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10919 | ServerView Raid | True | Warning | Normal | True | Application |
| State change on disk from shielded to offline [SERVERVIEW_RAID_10924] | State change on disk from shielded to offline | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10924 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10924 | ServerView Raid | True | Warning | Normal | True | Application |
| State change on disk from shielded to failed [SERVERVIEW_RAID_10925] | State change on disk from shielded to failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10925 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10925 | ServerView Raid | True | Error | High | True | Application |
| State change on disk from shielded to shielded [SERVERVIEW_RAID_10931] | State change on disk from shielded to shielded | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10931 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10931 | ServerView Raid | True | Error | High | True | Application |
| State change on disk from available to shielded [SERVERVIEW_RAID_10932] | State change on disk from available to shielded | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10932 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10932 | ServerView Raid | True | Error | High | True | Application |
| State change on disk from offline to shielded [SERVERVIEW_RAID_10933] | State change on disk from offline to shielded | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10933 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10933 | ServerView Raid | True | Error | High | True | Application |
| State change on disk from failed to shielded [SERVERVIEW_RAID_10934] | State change on disk from failed to shielded | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10934 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10934 | ServerView Raid | True | Error | High | True | Application |
| State change on disk from hot spare to shielded [SERVERVIEW_RAID_10935] | State change on disk from hot spare to shielded | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10935 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10935 | ServerView Raid | True | Error | High | True | Application |
| State change on disk from rebuilding to shielded [SERVERVIEW_RAID_10936] | State change on disk from rebuilding to shielded | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10936 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10936 | ServerView Raid | True | Error | High | True | Application |
| State change on disk from operational to shielded [SERVERVIEW_RAID_10937] | State change on disk from operational to shielded | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10937 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10937 | ServerView Raid | True | Error | High | True | Application |
| State change on disk from copyback to shielded [SERVERVIEW_RAID_10938] | State change on disk from copyback to shielded | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10938 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10938 | ServerView Raid | True | Error | High | True | Application |
| State change on disk from JBOD to shielded [SERVERVIEW_RAID_10939] | State change on disk from JBOD to shielded | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10939 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10939 | ServerView Raid | True | Error | High | True | Application |
| State change by user on disk from shielded to offline [SERVERVIEW_RAID_10941] | State change by user on disk from shielded to offline | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10941 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 10941 | ServerView Raid | True | Warning | Normal | True | Application |
| State change by user on disk from shielded to failed [SERVERVIEW_RAID_10942] | State change by user on disk from shielded to failed | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10942 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10942 | ServerView Raid | True | Error | High | True | Application |
| State change by user on disk from shielded to shielded [SERVERVIEW_RAID_10948] | State change by user on disk from shielded to shielded | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10948 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10948 | ServerView Raid | True | Error | High | True | Application |
| State change by user on disk from available to shielded [SERVERVIEW_RAID_10949] | State change by user on disk from available to shielded | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10949 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10949 | ServerView Raid | True | Error | High | True | Application |
| State change by user on disk from offline to shielded [SERVERVIEW_RAID_10950] | State change by user on disk from offline to shielded | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10950 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10950 | ServerView Raid | True | Error | High | True | Application |
| State change by user on disk from failed to shielded [SERVERVIEW_RAID_10951] | State change by user on disk from failed to shielded | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10951 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10951 | ServerView Raid | True | Error | High | True | Application |
| State change by user on disk from hot spare to shielded [SERVERVIEW_RAID_10952] | State change by user on disk from hot spare to shielded | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10952 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10952 | ServerView Raid | True | Error | High | True | Application |
| State change by user on disk from rebuilding to shielded [SERVERVIEW_RAID_10953] | State change by user on disk from rebuilding to shielded | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10953 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10953 | ServerView Raid | True | Error | High | True | Application |
| State change by user on disk from operational to shielded [SERVERVIEW_RAID_10954] | State change by user on disk from operational to shielded | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10954 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10954 | ServerView Raid | True | Error | High | True | Application |
| State change by user on disk from copyback to shielded [SERVERVIEW_RAID_10955] | State change by user on disk from copyback to shielded | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10955 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10955 | ServerView Raid | True | Error | High | True | Application |
| State change by user on disk from JBOD to shielded [SERVERVIEW_RAID_10956] | State change by user on disk from JBOD to shielded | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_10956 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 10956 | ServerView Raid | True | Error | High | True | Application |
| Unexpected disconnect from ServerView RAID Manager [SERVERVIEW_RAID_4] | The server disconnected unexpectedly from the ServerView RAID Manager | Fujitsu.Servers.PRIMERGY.Rules.SERVERVIEW_RAID_4 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 4 | ServerView Raid | True | Error | High | True | Application |
| Unable to open WMI namespace. [SVISCOM_VBS_111] | VBscript 'PRIMERGYServerDiscovery.vbs': On trying to access the WMI namespace for an entry (see Windows Event Log (Operations Manager) on the managed host) there occurred an error. Check if the WMI service is enabled and running, and ensure that this WMI namespace exists. | Fujitsu.Servers.PRIMERGY.Rules.SVISCOM_VBS_111 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 111 | Health Service Script | True | Error | High | True | Operations Manager |
| WMI class returned no instances. [SVISCOM_VBS_112] | The VBscript 'PRIMERGYServerDiscovery.vbs' tried to access a WMI class (class name: see Windows Event Log (Operations Manager) on the managed host), which returned no instances. Check if this is a valid WMI class name. | Fujitsu.Servers.PRIMERGY.Rules.SVISCOM_VBS_112 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 112 | Health Service Script | True | Error | High | True | Operations Manager |
| WMI class returned invalid instances. [SVISCOM_VBS_113] | The VBscript 'PRIMERGYServerDiscovery.vbs' tried to access a WMI class (class name: see Windows Event Log (Operations Manager) on the managed host), which returned invalid instances. Check if this is a valid WMI class name. | Fujitsu.Servers.PRIMERGY.Rules.SVISCOM_VBS_113 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 113 | Health Service Script | True | Error | High | True | Operations Manager |
| Unable to connect to WMI. [SVISCOM_VBS_114] | The VBscript 'PRIMERGYServerDiscovery.vbs' was unable to connect to WMI: /root/default:StdRegProv. | Fujitsu.Servers.PRIMERGY.Rules.SVISCOM_VBS_114 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 114 | Health Service Script | True | Error | High | True | Operations Manager |
| WMI class 'FSCSV_SystemEnclosure' working incorrectly. [SVISCOM_VBS_115] | VBscript 'PRIMERGYServerDiscovery.vbs': The ServerView Agents create a WMI class 'FSCSV_SystemEnclosure'. This class cannot be accessed in WMI. | Fujitsu.Servers.PRIMERGY.Rules.SVISCOM_VBS_115 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 115 | Health Service Script | True | Warning | Normal | True | Operations Manager |
| Unsupported ServerView Agents version. [SVISCOM_VBS_116] | The VBscript 'PRIMERGYServerDiscovery.vbs' found ServerView Agents installed, but the version installed is not supported. See Remark for old HW in KnowledgeBase article! | Fujitsu.Servers.PRIMERGY.Rules.SVISCOM_VBS_116 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 116 | Health Service Script | True | Warning | Normal | True | Operations Manager |
| Not enough arguments -> Components discovery script exits with error. [SVISCOM_VBS_121] | The VBscript 'PRIMERGYComponentsDiscovery.vbs' was called with not enough arguments. | Fujitsu.Servers.PRIMERGY.Rules.SVISCOM_VBS_121 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 121 | Health Service Script | True | Error | High | True | Operations Manager |
| No ServerView Agents installed. [SVISCOM_VBS_122] | VBscript 'PRIMERGYComponentsDiscovery.vbs': The server is selected for monitoring, but the ServerView Agents are not installed. | Fujitsu.Servers.PRIMERGY.Rules.SVISCOM_VBS_122 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 122 | Health Service Script | True | Error | High | True | Operations Manager |
| Unsupported ServerView Agents version. [SVISCOM_VBS_123] | The VBscript 'PRIMERGYComponentsDiscovery.vbs' found ServerView Agents installed, but the version installed is not supported. | Fujitsu.Servers.PRIMERGY.Rules.SVISCOM_VBS_123 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 123 | Health Service Script | True | Error | High | True | Operations Manager |
| ServerView Agents not running. [SVISCOM_VBS_124] | The VBscript 'PRIMERGYComponentsDiscovery.vbs' found ServerView Agents installed on the server, but the ServerView Agents are not running. | Fujitsu.Servers.PRIMERGY.Rules.SVISCOM_VBS_124 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 124 | Health Service Script | True | Warning | Normal | True | Operations Manager |
| SCCI interface not supported. [SVISCOM_VBS_125] | VBscript 'PRIMERGYComponentsDiscovery.vbs': The SCCI 'RSwitch' COM object could not be created. | Fujitsu.Servers.PRIMERGY.Rules.SVISCOM_VBS_125 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 125 | Health Service Script | True | Error | High | True | Operations Manager |
| WMI class does not deliver expected memory size data. [SVISCOM_VBS_126] | VBscript 'PRIMERGYComponentsDiscovery.vbs': One WMI object does not deliver expected memory size data. | Fujitsu.Servers.PRIMERGY.Rules.SVISCOM_VBS_126 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 126 | Health Service Script | True | Error | High | True | Operations Manager |
| WMI Status of Management Controller is undefined. [SVISCOM_VBS_131] | VBscript 'PRIMERGYComponentsDiscovery.vbs': The WMI Status of the Management Controller is undefined (WMI Class: 'FSCSV_ManagementController'); No Monitoring of BMC. | Fujitsu.Servers.PRIMERGY.Rules.SVISCOM_VBS_131 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 131 | Health Service Script | True | Warning | Normal | True | Operations Manager |
| The Status of Network Adapter is undefined. [SVISCOM_VBS_132] | VBscript 'PRIMERGYComponentsDiscovery.vbs': Trying to retreive information about the network adapter using the WMI Class: 'Win32_NetworkAdapter' resulted in an error. | Fujitsu.Servers.PRIMERGY.Rules.SVISCOM_VBS_132 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 132 | Health Service Script | True | Warning | Normal | True | Operations Manager |
| Unable to connect to WMI. [SVISCOM_VBS_133] | The VBscript 'PRIMERGYComponentsDiscovery.vbs' was unable to connect to WMI: /root/default:StdRegProv. | Fujitsu.Servers.PRIMERGY.Rules.SVISCOM_VBS_133 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 133 | Health Service Script | True | Error | High | True | Operations Manager |
| Unable to open WMI namespace. [SVISCOM_VBS_134] | VBscript 'PRIMERGYComponentsDiscovery.vbs': On trying to access the WMI namespace for an entry (see Windows Event Log (Operations Manager) on the managed host) there occurred an error. Check if the WMI service is enabled and running, and ensure that this WMI namespace exists. | Fujitsu.Servers.PRIMERGY.Rules.SVISCOM_VBS_134 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 134 | Health Service Script | True | Error | High | True | Operations Manager |
| WMI class returned no instances. [SVISCOM_VBS_135] | The VBscript 'PRIMERGYComponentsDiscovery.vbs' tried to access a WMI class (class name: see Windows Event Log (Operations Manager) on the managed host), which returned no instances. Check if this is a valid WMI class name. | Fujitsu.Servers.PRIMERGY.Rules.SVISCOM_VBS_135 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 135 | Health Service Script | True | Error | High | True | Operations Manager |
| WMI class returned invalid instances. [SVISCOM_VBS_136] | The VBscript 'PRIMERGYComponentsDiscovery.vbs' tried to access a WMI class (class name: see Windows Event Log (Operations Manager) on the managed host), which returned invalid instances. Check if this is a valid WMI class name. | Fujitsu.Servers.PRIMERGY.Rules.SVISCOM_VBS_136 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 136 | Health Service Script | True | Error | High | True | Operations Manager |
| ServerView Agents communication problem - CPU data [SVISCOM_VBS_137] | The VBscript 'PRIMERGYComponentsDiscovery.vbs' tried to get the number of CPUs from the ServerView Agents. No data was returned. | Fujitsu.Servers.PRIMERGY.Rules.SVISCOM_VBS_137 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 137 | Health Service Script | True | Error | High | True | Operations Manager |
| ServerView Agents communication problem - Memory data [SVISCOM_VBS_138] | The VBscript 'PRIMERGYComponentsDiscovery.vbs' tried to get the number of memories from the ServerView Agents. No data was returned. | Fujitsu.Servers.PRIMERGY.Rules.SVISCOM_VBS_138 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 138 | Health Service Script | True | Error | High | True | Operations Manager |
| ServerView Agents communication problem - power consumption data [SVISCOM_VBS_139] | The VBscript 'PRIMERGYComponentsDiscovery.vbs' tried to get data about the power consumption (details: see Windows Event Log (Operations Manager) on the managed host) from the ServerView Agents. No data was returned. | Fujitsu.Servers.PRIMERGY.Rules.SVISCOM_VBS_139 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 139 | Health Service Script | True | Error | High | True | Operations Manager |
| Not enough arguments -> Components monitoring script exits with error. [SVISCOM_VBS_141] | The VBscript 'PRIMERGYComponentsMonitor.vbs' was called with not enough arguments. | Fujitsu.Servers.PRIMERGY.Rules.SVISCOM_VBS_141 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 141 | Health Service Script | True | Error | High | True | Operations Manager |
| SCCI interface not supported. [SVISCOM_VBS_145] | VBscript 'PRIMERGYComponentsMonitor.vbs': The SCCI 'RSwitch' COM object could not be created. This object is used to communicate with the agents. | Fujitsu.Servers.PRIMERGY.Rules.SVISCOM_VBS_145 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 145 | Health Service Script | True | Warning | Normal | True | Operations Manager |
| Communication Error - ServerView Overall State [SVISCOM_VBS_146] | VBscript 'PRIMERGYComponentsMonitor.vbs' could not determine the Overall State of the system - communication error with the ServerView Agents! | Fujitsu.Servers.PRIMERGY.Rules.SVISCOM_VBS_146 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 146 | Health Service Script | True | Error | Normal | True | Operations Manager |
| Unable to open WMI namespace. [SVISCOM_VBS_151] | VBscript 'PRIMERGYComponentsMonitor.vbs': On trying to access the WMI namespace for an entry (see Windows Event Log (Operations Manager) on the managed host) there occurred an error. Check if the WMI service is enabled and running, and ensure that this WMI namespace exists. | Fujitsu.Servers.PRIMERGY.Rules.SVISCOM_VBS_151 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 151 | Health Service Script | True | Error | High | True | Operations Manager |
| WMI class returned no instances. [SVISCOM_VBS_152] | The VBscript 'PRIMERGYComponentsMonitor.vbs' tried to access a WMI class (class name: see Windows Event Log (Operations Manager) on the managed host), which returned no instances. Check if this is a valid WMI class name. | Fujitsu.Servers.PRIMERGY.Rules.SVISCOM_VBS_152 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 152 | Health Service Script | True | Error | High | True | Operations Manager |
| WMI class returned invalid instances. [SVISCOM_VBS_153] | The VBscript 'PRIMERGYComponentsMonitor.vbs' tried to access a WMI class (class name: see Windows Event Log (Operations Manager) on the managed host), which returned invalid instances. Check if this is a valid WMI class name. | Fujitsu.Servers.PRIMERGY.Rules.SVISCOM_VBS_153 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 153 | Health Service Script | True | Error | High | True | Operations Manager |
| Unable to connect to WMI. [SVISCOM_VBS_154] | The VBscript 'PRIMERGYComponentsMonitor.vbs' was unable to connect to WMI: /root/default:StdRegProv. | Fujitsu.Servers.PRIMERGY.Rules.SVISCOM_VBS_154 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 154 | Health Service Script | True | Error | High | True | Operations Manager |
| ServerView Agents communication problem - CPU data [SVISCOM_VBS_155] | The VBscript 'PRIMERGYComponentsMonitor.vbs' tried to get data about the CPUs (details: see Windows Event Log (Operations Manager) on the managed host) from the ServerView Agents. No data was returned. | Fujitsu.Servers.PRIMERGY.Rules.SVISCOM_VBS_155 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 155 | Health Service Script | True | Error | High | True | Operations Manager |
| ServerView Agents communication problem - Memory data [SVISCOM_VBS_156] | The VBscript 'PRIMERGYComponentsMonitor.vbs' tried to get data about the memories (details: see Windows Event Log (Operations Manager) on the managed host) from the ServerView Agents. No data was returned. | Fujitsu.Servers.PRIMERGY.Rules.SVISCOM_VBS_156 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 156 | Health Service Script | True | Error | High | True | Operations Manager |
| ServerView Agents communication problem - fan data [SVISCOM_VBS_157] | The VBscript 'PRIMERGYComponentsMonitor.vbs' tried to get data about the fans (details: see Windows Event Log (Operations Manager) on the managed host) from the ServerView Agents. No data was returned. | Fujitsu.Servers.PRIMERGY.Rules.SVISCOM_VBS_157 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 157 | Health Service Script | True | Error | High | True | Operations Manager |
| ServerView Agents communication problem - power consumption data [SVISCOM_VBS_158] | The VBscript 'PRIMERGYComponentsMonitor.vbs' tried to get data about the power consumption (details: see Windows Event Log (Operations Manager) on the managed host) from the ServerView Agents. No data was returned. | Fujitsu.Servers.PRIMERGY.Rules.SVISCOM_VBS_158 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 158 | Health Service Script | True | Error | High | True | Operations Manager |
| ServerView Agents communication problem - got no OVERALL status for RAID [SVISCOM_VBS_159] | The VBscript 'PRIMERGYComponentsMonitor.vbs' tried to get data about the RAID status from the ServerView Agents. No data was returned. | Fujitsu.Servers.PRIMERGY.Rules.SVISCOM_VBS_159 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 159 | Health Service Script | True | Error | High | True | Operations Manager |
| Ethernet Adapter communication problem - got no status [SVISCOM_VBS_160] | The VBscript 'PRIMERGYComponentsMonitor.vbs' tried to get the status of the ethernet controller. No data is available. | Fujitsu.Servers.PRIMERGY.Rules.SVISCOM_VBS_160 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 160 | Health Service Script | True | Error | High | True | Operations Manager |
| ServerView RAID communication problem - got no status for RAID from amCLI.exe [SVISCOM_VBS_161] | The VBscript 'PRIMERGYComponentsMonitor.vbs' tried to get the RAID status from ServerView RAID. No data was returned. | Fujitsu.Servers.PRIMERGY.Rules.SVISCOM_VBS_161 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 161 | Health Service Script | True | Error | High | True | Operations Manager |
| ServerView RAID communication problem - got no status for RAID physical disk [SVISCOM_VBS_162] | The VBscript 'PRIMERGYComponentsMonitor.vbs' tried to get the RAID physical disk status from ServerView Agents. No data was returned. | Fujitsu.Servers.PRIMERGY.Rules.SVISCOM_VBS_162 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 162 | Health Service Script | True | Error | High | True | Operations Manager |
| ServerView RAID communication problem - got no RAID disk S.M.A.R.T. status for physical disk [SVISCOM_VBS_163] | The VBscript 'PRIMERGYComponentsMonitor.vbs' tried to get the RAID disk S.M.A.R.T. status from ServerView Agents. No data was returned. | Fujitsu.Servers.PRIMERGY.Rules.SVISCOM_VBS_163 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 163 | Health Service Script | True | Error | High | True | Operations Manager |
| ServerView RAID communication problem - got no status for RAID logical drive [SVISCOM_VBS_164] | The VBscript 'PRIMERGYComponentsMonitor.vbs' tried to get the RAID logical drive status from ServerView Agents. No data was returned. | Fujitsu.Servers.PRIMERGY.Rules.SVISCOM_VBS_164 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 164 | Health Service Script | True | Error | High | True | Operations Manager |
| The configured threshold has been exceeded [THRESHOLD_MIB_12200] | Threshold exceeded at server. The rule (rule) met condition with value (value). | Fujitsu.Servers.PRIMERGY.Rules.THRESHOLD_MIB_12200 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12200 | ServerView Agents | True | Error | High | True | Application |
| The configured threshold has been exceeded [THRESHOLD_MIB_12201] | Threshold exceeded at server. The rule (rule) met condition with value (value). | Fujitsu.Servers.PRIMERGY.Rules.THRESHOLD_MIB_12201 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | True | | | 0 | 12201 | ServerView Agents | True | Error | High | True | Application |
| The configured threshold has been exceeded [THRESHOLD_MIB_12202] | Threshold exceeded at server. The rule (rule) met condition with value (value). | Fujitsu.Servers.PRIMERGY.Rules.THRESHOLD_MIB_12202 | Fujitsu.Servers.PRIMERGY.Server | EventCollection | False | | | 0 | 12202 | ServerView Agents | True | Warning | Normal | True | Application |
Home